20060317Final Approved Tariffs.pdf

'*
PACIFICORP
PACIFIC POWER UTAH POWER
825 NE. Mu/tnomah St.
Portland OR 97232
, .,..
J ,;; C;:l~
:::.
ii:~~:,~:lj,;::):;i(;:
March 8, 2006
Idaho Public Utilities Commission
472 West Washington
Boise, ill 83702-5983
Attention:Jean D. Jewell
Commission Secretary
Re:Case No. PAC-E- 05-10 Replacement Pages
PacifiCorp hereby submits replacement pages for Case No. PAC-E- 05-10 to reflect suggested
modifications per Order No. 29976 and discussions with Commission Staff.
Original Sheet No.1l5.Schedule 115
Original Sheet No. 115-Schedule 115
Original Sheet No. 115-Schedule 115
Original Sheet No. 115-Schedule 115
Original Sheet No. 115-Schedule 115
Original Sheet No. 115-Schedule 115
Original Sheet No. 115-Schedule 115
Original Sheet No. 115-Schedule 115
Original Sheet No. 115-Schedule 115
Original Sheet No. 117.Schedule 117
Commercial and Industrial Energy
Efficiency Incentives Optional for
Qualifying Customers
Commercial and Industrial Energy
Efficiency Incentives Optional for
Qualifying Customers
Commercial and Industrial Energy
Efficiency Incentives Optional for
Qualifying Customers
Commercial and Industrial Energy
Efficiency Incentives Optional for
Qualifying Customers
Commercial and Industrial Energy
Efficiency Incentives Optional for
Qualifying Customers
Commercial and Industrial Energy
Efficiency Incentives Optional for
Qualifying Customers
Commercial and Industrial Energy
Efficiency Incentives Optional for
Qualifying Customers
Commercial and Industrial Energy
Efficiency Incentives Optional for
Qualifying Customers
Commercial and Industrial Energy
Efficiency Incentives Optional for
Qualifying Customers
Residential Refrigerator Recycling
Program
Original Sheet No. 117.2 Schedule 117
Fourth Revision of Sheet No. 120.Schedule 120
Fourth Revision of Sheet No. 120.Schedule 120
Fourth Revision of Sheet No. 122.Schedule 122
Fourth Revision of Sheet No. 122.
Original Sheet No. 155.
Original Sheet No. 155.
Original Sheet No. 155.3
Original Sheet No. 155.4
Original Sheet No. 155.
Original Sheet No. 155.
Original Sheet No. 155.
Original Sheet No. 191
Schedule 122
Schedule 155
Schedule 155
Schedule 155
Schedule 155
Schedule 155
Schedule 155
Schedule 155
Schedule 191
Residential Refrigerator Recycling
Program
Commercial Energy Services Optional
to Qualifying Customers
Commercial Energy Services Optional
to Qualifying Customers
Commercial Energy Services Optional
to Qualifying Customers
Commercial Energy services Optional
to Qualifying Customers
Optional for Qualifying Customers
Optional for Qualifying Customers
Optional for Qualifying Customers
Optional for Qualifying Customers
Optional for Qualifying Customers
Optional for Qualifying Customers
Optional for Qualifying Customers
Customer Efficiency Services
Adjustment
It is respectfully requested that all formal correspondence and Staff requests regarding this filing
be addressed to:
Bye-mail (preferred):
By regular mail:
By fax:
datareq uest(0p acifi corp. com
Data Request Response Center
PacifiCorp
825 NE Multnomah, Suite 800
Portland, Oregon, 97232
[phone]
Informal questions should be directed to Jeff Bumgarner. at [phone]
Sincerely,
D. Douglas Larson
Vice President, Regulation
Enclosures
ulah
nlJYM
C. No. 28 Original Sheet No. 115.
UTAH POWER & LIGHT COMPANY
ELECTRIC SERVICE SCHEDULE NO. 115
STATE OF IDAHO
Commercial and Industrial Energy Efficiency Incentives
Optional for Qualifying Customers
PURPOSE: Service under this Schedule is intended to maximize the efficient utilization
of the electricity requirements of new and existing loads in Commercial Buildings and Industrial
Facilities through the installation of Energy Efficiency Measures. Service under this Schedule is
subject to funds availability.
APPLICABLE: To service under the Company s General Service Schedules 6, 6A, 8, 9
, 17, 19 , 23A, 24 35 and 35A in all territory served by the Company in the State ofldaho.
This Schedule is applicable to new and existing Commercial Buildings and Industrial Facilities
dairy barns served under the Company s residential rate schedules and traffic signals.
DEFINITIONS:
Commercial Building: A structure that is served by Company and meets the
applicability requirements of this tariff at the time an Energy Efficiency Incentive
Agreement! Application is executed or approved by the Company which does not
meet the definition of an Industrial Facility.
Customer: Any party who has applied for, been accepted and receives service at
the real property, or is the electricity user at the real property.
Energy Efficiency Incentive: Payments of money made by Company to Owner
or Customer for installation of an Energy Efficiency Measure pursuant to an
executed Energy Efficiency Incentive Agreement or approved Application.
Energy Efficiency Incentive Agreement/Application: An agreement between
Owner or Customer and Company or a Company provided application submitted
by the Owner or Customer and approved by the Company providing for Company
to furnish Energy Efficiency Incentives with respect to Energy Efficiency
Measures pursuant to this Tariff Schedule.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
n IJYM
C. No. 28 Original Sheet No. 115.
ELECTRICAL SERVICE SCHEDULE NO. 115 (Continued)
DEFINITIONS: (Continued)
Energy Efficiency Measure (EEM): A permanently installed measure which
can improve the efficiency of the Customer s electric energy use.
Energy Efficiency Measure (EEM) Cost:
New Construction: EEM Cost is the total installed cost of energy efficiency
equipment or system minus the cost of the code compliance/common practice
equipment or system.
Retrofit: EEM Cost is the total installed cost of the energy efficiency equipment or
modification.
In the case of both new construction and retrofits, EEM Costs shall mean the
Owner or Customer s reasonable costs incurred (net of any discounts, rebates or
incentives other than Energy Efficiency Incentives from the Company, or other
consideration that reduces the final actual EEM Cost incurred by the Owner or
Customer) to purchase and install EEMs at the Owner s or Customer s facility. If
the owner or customer installs the EEM then the cost of installation shall be equal
to the Owner s or Customer s actual labor costs for such installation.
Energy Efficiency Project: One or more EEM(s) with similar one year payback
limitations (below) covered by one Energy Efficiency Incentive Agreement or
approved application.
Industrial Facility: Buildings and process equipment associated with
manufacturing.
Mixed Use: Buildings served by a residential rate schedule and a rate schedule
listed under Applicable shall be eligible for services under this schedule provided
the Energy Efficiency Project meets the definition of New Construction or where
the Company adjusts the baseline energy consumption and costs.
New construction: A newly constructed facility or newly constructed square
footage added to an existing facility.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12 , 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulahHlaV
C. No. 28 Original Sheet No. 115.
ELECTRICAL SERVICE SCHEDULE NO. 115 (Continued)
DEFINITIONS: (Continued)
Owner: The person who has both legal and beneficial title to the real property,
and is the mortgager under a duly recorded mortgage of real property, the trustor
under a duly recorded deed oftrust.
Retrofit: Changes, modifications or additions to systems or equipment in existing
facility square footage.
INCENTIVE FOR ENERGY EFFICIENCY MEASURES: The Company will
provide Energy Efficiency Incentives per the Provisions of Service to participating Owners or
Customers who have installed EEMs listed in the tables in this schedule or are eligible for an
Energy Efficiency Incentive per the formula listed below.
Energy Efficiency Projects consisting of Retrofit lighting EEMs (listed & not listed) and!
or other Retrofit EEMs are eligible for Energy Efficiency Incentives provided the simple payback
(based on electricity cost savings) before incentives is one year or more. EEMs with simple
paybacks before incentives of less than one year are eligible for Energy Efficiency Incentives
provided the Energy Efficiency Project has a simple payback before incentives of one year or
more. Energy Efficiency Incentives will not be available to reduce the simple payback of an
Energy Efficiency Project below one year. If required, individual EEM Energy Efficiency
Incentives will be adjusted downward pro-rata so the Energy Efficiency Project has a simple
payback after incentives of one year or more. Retrofit motor and Mechanical EEMs (listed on
Tables 2 and 3 & not listed) and New Construction EEMs are not subject to the payback
limitations listed above.
EEMs not listed in the incentive tables may be eligible for Energy Efficiency Incentives.
Electric savings resulting from lighting interaction with mechanical equipment will not be
eligible for an Energy Efficiency Incentive. The Company will complete an analysis of the EEM
Cost and electric energy savings and determine at its sole option whether to offer an Energy
Efficiency Incentive and the Energy Efficiency Incentive amount. Energy Efficiency Incentives
for such EEMs will be the lesser of (a) the product of multiplying the Company s estimate of
annual energy savings by $0.08/kWh; or (b) 35% of the EEM Cost as determined by the
Company.
Company may adjust baseline electric energy consumption and costs to reflect any of the
following: energy codes, standard practice, changes in capacity, changes in production or facility
use and equipment at the end of its useful life. Such adjustments may be made for lighting energy
efficiency measures installed in new construction projects where energy code does not apply.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
Blah
HIJYM
c. No. 28 Original Sheet No. 115.
ELECTRICAL SERVICE SCHEDULE NO. 115 (Continued)
INCENTIVE FOR ENERGY EFFICIENCY MEASURES: (Continued)
For existing fixtures, the baseline for all fluorescent lighting Energy Efficiency Measures
not listed in incentive Table 1 shall be the lesser of existing equipment or the energy efficient
magnetic ballast and energy saving lamp combination as listed in the lighting table available on
the Idaho energy efficiency program section of the Company web site.
Except for motors and mechanical energy efficiency measures listed in Tables 2 and 3
Lighting Energy Efficiency Measures listed in Table 1 in New Construction projects and
incentives for EEMs not listed (p.3), EEM Energy Efficiency Incentives shall not exceed 50% of
the EEM Cost.
All EEM Costs are subject to Company review and approval prior to offering an Energy
Efficiency Incentive Agreement or approving Energy Efficiency Incentive Application. All final
EEM Costs are subject to Company review and approval prior to paying an Energy Efficiency
Incentive per the terms of the Energy Efficiency Incentive Agreement or approved Application.
Company review and approval of EEM Costs may require additional documentation from the
Customer or Owner.
The Owner or Customer may receive only one Energy Efficiency Incentive from the
Company per EEM.
PROVISIONS OF SERVICE:(1) Company may elect to offer EEM incentives through different channels and at
different points in the sales process other than individual Energy Efficiency
Incentive Agreement(s) or Applications prior to EEM purchase. The differences
will depend on EEM or project type and will be consistent for all EEMs or
projects of similar type. Incentive requirements by EEM or project type and other
terms and conditions will be available on the Idaho energy efficiency program
section of the Company s web site. Changes in incentive requirements and/or
terms and conditions may be changed by the Company with at least 60 days notice
on the Idaho energy efficiency program section of the Company s web site.
Customer/Owner has the option to receive a signed Energy Efficiency Incentive
Agreement or request approval of an Application direct from the Company prior
to purchase of eligible EEMs.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
HIJYM
c. No. 28 Original Sheet No. 115.
ELECTRICAL SERVICE SCHEDULE NO. 115 (Continued)
PROVISIONS OF SERVICE: (Continued)(2) Company will employ a variety of quality assurance techniques during the
delivery of the program. They will differ by EEM and may include pre and post
installation inspections, phone surveys, and confirmation of customer and
equipment eligibility.
Company may verify or evaluate the energy savings of installed EEMs. This
verification may include a telephone survey, site visit, review of plant operation
characteristics, and pre- and post-installation of monitoring equipment and as
necessary to quantify actual energy savings.
(3)
ELECTRIC SERVICE REGULATIONS Service under this Schedule will be in
accordance with the terms of the Electric Service Agreement between the Customer and the
Company. The Electric Service Regulations of the Company on file with and approved by the
Idaho Public Utility Commission, including future applicable amendments, will be considered as
forming a part of and incorporated in said Agreement.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8 , 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
HIJYM
C. No. 28 Original Sheet No. 115.
ELECTRICAL SERVICE SCHEDULE NO. 115 (Continued)
(:;;!~t\or
Fluorescent Fixture Upgrade to 4'1 or 2 Tl2 lamp(s) + I
Standard TS Fixtures (Standard TS ballast (MB)
lamps and electronic ballasts with 4'3 or4 Tl2Iamp(s) + MB(s)
ballast factor (BF) :::;O.SS) S'3 or 4 Tl21amps + MB(s)
3 or 4 Tl2 HONHO lamps
MB(s)
30r4TSlams+EB $10
S' - 1 3 or 4 TSlam s +EB, see note 6 $10
+ 8' - 1 , or 4 T8 HONHO lamps +EB(s), see $15
note 6
Fluorescent Fixture Upgrade to 4'
Premium TS Fixtures (Lamps with
initial lumens ;:::3100 or wattage :::;30
W; electronic ballasts with BF :::;O.
4' - I or 2 Tl2 lamp(s) + MB or Standard
' -
T81TS lamp(s) + EB or renuum amp s
3 or4 Tl2 lamps + MB(s) or Standard T81TS lamps + EB - or renuum amps
S' - I or 2 Tl2Iamp(s) + MB(s) 4' - 2, 3 or 4 Premium T8 lam s + EB
$10
Fluorescent Delamping and Standard
TS Fixture Upgrade (Standard TS
lamps and electronic ballasts (EB)
with BF :::;O.SS - Fixture removal is
not eligible)
4' - I Standard TS lamp +EB
4' - 2 or I Standard TS lamp +EB
4' - 3 Standard TSlam s +EB
4' - 2 or I Standard TS lamp +EB
4' - I-Premium TS lamp +EB
$15
$20
$102 Tl21amps + MB
3 Tl21amps + MB(s)
4 Tl21amps + MB(s)
4 Tl21amps + MB(s)
Fluorescent Delamping and Premium 4'2 Tl21amps + MBTS Fixture Upgrade (Lamps with
initial lumens ;:::3100 or wattage :::;30 4'3 Tl21amps + MB(s)
W; electronic ba~lasts wit~ BF :::;O.S. 4'4 Tl2lamps + MB(s)Fixture removal IS not eligible)
4' - 2 or I-Premium TS lamp +EB
4' - 3-Premium TS lamps +EB
$15
$15
$25
$15
$20
$20
4 Tl2lamps + MB(s)4' - 2 or I-Premium TSlamp +EB
.::1 OW (nominal) CFL hardwire fixture
$30
$10Compact Fluorescent Lighting (CFL) Incandescent
Incandescent
2::IOW ':: 20W (nominal) CFL hardwire fixture $15
Incandescent 2::20W (nominal) CFL hardwire fixture
;:.40W two- iece screw-in CFL
Single-piece screw in CFL (all wattages)
$20
Incandescent
Incandescent
T5 Fluorescent Fixture Upgrade 2::250 W MH, MY or HPS 3 T5HO lamps (nominal 4') + EB (High Bay) $70
4 or 6 T5HO lamps (nominal 4') + EB (High $75
Bay)
, 2, or 3 T5 lamps (nominal 4') EB (interior $20
fixtures
2 T5 HO lamps (nominal 4') EB (interior $20
fixtures)
2:: 400 W MH, MV, orHPS
, or 3 T12 lamps + MB(s)
4' 4 TS or Tl2 lamps + MB(s)
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
H IJYM
c. No. 28 Original Sheet No. 115.
ELECTRICAL SERVICE SCHEDULE NO. 115 (Continued)
Cafe
High Intensity Discharges
(HID) Upgrades
Based on lamp wattages
;:::40W and :::;120W incandescent or tungsten ;:::35W and :::;IOOW Ceramic Metal Halide
;:::150W and :::; 250W MH, MV, or HPS, or ;:::125W and :::;175W Pulse Start MH
;:.150W incandescent
;:.250W and .:: 400W MH, MY, or HPS
;:. 400W MH, MV, or HPS
2:;IOOOW MH, MV or HPS
;:.250W &'::400WMH , MV, orHPS
;:.400W MH, MV, orHPS
;:.750 W MH, MV or HPS
Incandescent or fluorescent exit signs
;:::400W MH, MV or HPS
;:::750W MH, MV, or HPS
Exit Signs
Lighting Controls Wall switch or no control
Traffic light upgrades
No control
No control
No control
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
$25
$100;:::250W and :S320W Ceramic Metal Halide
:::;400 W Ceramic Metal Halide $120
$60
;:.175W and .::320W Pulse Start MH $SO
;:.320W and .::400W Pulse Start MH $100
;:.400W and .::750W Pulse Start Metal Halide $120
- 4 lam TS + EB (High Bay), see note 6 $50
- 6 lam TS + EB(s) (High Bay), see note 6 $50
- Slam TS + EB(s) (High Bay), see note 6 $100
Light Emitting Diode (LED) or Electro $15
luminescent (EL Exit Si - I or 2 faced
Wall or Ceiling Mounted Occupancy Sensor $30
er sensor)
Integral occu ancy sensor
Photocell ( er sensor)
Time clock (per control)
LED Green Ball
LED Yellow and Green Ball
LED Green Arrow 12" or S"
LED Don t Walk
LED Walk
$25
$20
$20
$40
$SO
$30
$50
$20
Notes for Table I:
Incentives are capped at 50 percent ofEEM Costs except for Lighting EEMs listed above installed in New Construction.
2' U-tube lamps may be substituted for 4' linear fluorescent lamps in the above table
For retrofits of existing equipment, lighting incentives will be paid on a one-for-one equipment replacement basis. If fixture counts
are changing, the project may be considered under the approach for measures not listed (see page 3).
The total conuected interior lighting power for New Construction projects required to comply with the energy code must be 10
percent lower than the interior lighting power allowance calculated under the current version of the Idaho energy code. The date of
the building permit application shall establish the current version of the Code. For New Construction projects not required to
comply with the energy code, the total connected lighting power must be 10% lower than common practice as determined by the
Company.
Incentives for the following equipment types are not available for New Construction projects
Standard TS fixtures
Fixture de-Iamping
* LED Exit signs
One or two piece screw-in CFL fixtures
Lighting controls required under the current version of the Idaho energy code. The date of the building permit application shall
establish the current version of the Code.
6 Eight-foot TSs, TS HONHO and High Bay T-S electronic ballasts are required to have a BFs..1.2 to be eligible for incentives.
Maximum of two electronic ballasts per fixture.
Lighting equipment listed Q!!ly in the "Replace" column of Table I is not eligible for incentives.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
HIJYM
c. No. 28 Original Sheet No. 115.
ELECTRICAL SERVICE SCHEDULE NO. 115 (Continued)
Table 2 - NEMA Premium Efficiency Motors
...j( . .. .....".".... ."..' .'.......... ..... .....' .,. ....." .,...
1.5
100
125
150
200
.1.
$45
$45
$54
$54
$54
$81
$90
$104
$113
$117
$135
$162
$198
$234
$270
$360
$540
$630
$630
...,'...........,
li~
1':11
82.
87.
88.5
89.
89.
91.0
91.0
91.7
91.7
93.
93.
94.
94.
94.
94.
95.
95.
95.
95.
85.
86.
86.5
89.
89.
91.0
91.7
93.
93.
93.
94.
94.
94.
95.
95.
95.
95.4
95.
95.
85.
86.
86.
89.
89.
91.7
91.7
92.4
93.
93.
93.
94.
94.
95.
95.4
95.4
95.4
95.
96.
---. ..'
ij I
84.
85.
85.
86.
88.
89.
90.
91.0
91.7
91.7
92.4
93.
93.
93.
93.
94.
94.
95.
. c;c~
84.
85.
86.5
88.5
89.
90.
91.0
91.0
91.7
91.7
92.4
93.
93.
93.
94.
95.
95.
95.4
82.
86.
87.
88.
89.
90.
91.7
91.7
92.4
93.
93.
94.
94.
94.
94.
95.
95.
95.4
95.4
Notes for Table 2:I) Motors larger than 200 horsepower are not a listed measure and may be eligible under the approach for measures not listed
(see page 3).
2) The NEMA Premium efficiency ratings listed are nominal full-load efficiency ratings. Motors that meet or exceed these
efficiency requirements may qualify for an incentive.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulahHI.II
C. No. 28 Original Sheet No. 115.
ELECTRICAL SERVICE SCHEDULE NO. 115 (Continued)
Unitary Commercial -c65 000 Btulhr Split System and Single Package 15.0 SEER 210/240 $50Air Conditioners 12.5 EER
Air Cooled ::::65 000 Btulhr and -c Split System and Single Package 11.0 EER $50
(Cooling Mode)135 000 Btulhr 11.4 IPLV
~ 135 000 Btulhr and Split System and Single Package 10.8 EER 340/360 $50
-c 240 000 Btulhr 11.2 IPL V
:::: 240 000 Btulhr Split System and Single Package 10.0 EER $50
10.4 IPLV
Unitary Commercial -c 135 000 Btulhr Split System and Single Package 14.0 EER 210/240 $50
Air Conditioners
Water and Evaporatively ~ 135 000 BtuIhr 14.0 EER 340/360 $50
Cooled
Package Tenninal Air ~ 8 000 Btulhr Single Package 11.8 EER $50
Conditioners (PTAC)3 COP Heatin
(Heating & Cooling Mode)? 8 000 and -c 10 500 Single Package 11.4 EER $50
Btulhr 2 COP Heatin
:::: 10 500 and:::; 13 500 Single Package 10.7 EER $50
Btulhr 1 COP Heatin 310/380
? 13 500 Btulhr Single Package 10.0 EER $50
0 COP Heating
Heat Pumps -c 65 000 Btulhr Split System and Single Package 13.0 SEER 210/240 $50
Air Cooled ~ 65 000 Btulhr and -c Split System and Single Package 11.0 EER $50
(Cooling Mode)135 000 Btulhr 11.4 IPLV
~ 135 000 Btulhr and Split System and Single Package 10.8 EER 340/360 $50
-c 240 000 Btu/hr 11.2 IPLV
:::: 240 000 Btu/hr Split System and Single Package 10.0 EER $50
10.4 IPLV
Heat Pumps -c 65 000 Btu/hr Split System 0 HSPF See note 3 below
Air Cooled Single Package 5 HSPF See note 3 below(Heating Mode)
~ 65 000 Btulhr and -c 47OF. db /43OF. wb Outdoor Air 3.4 COP 340/360 See note 3 below
135 000 Btulhr 17OF. db /15OF. wb Outdoor Air 2.4 COP See note 3 below
~ 135 000 Btulhr 47OF. db /43OF. wb Outdoor Air 3 COP See note 3 below
17OF. db /15OF. wb Outdoor Air 2 COP 340/360 See note 3 below
Heat Pumps, Water Source -c 135 000 Btulhr 85OF. Entering water 14.0 EER 320 $50
(Cooling Mode)
Heat Pumps, Water Source -c 135 000 Btulhr 70oF. Entering water 6 COP 320 See note 3 below
(Heating Mode)
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
Blah
HIJYM
C. No. 28 Original Sheet No. 115.
ELECTRICAL SERVICE SCHEDULE NO. 115 (Continued)
Evaporative Cooling All Direct or Indirect Industry Standard Rating $0.02/ISR CFM
(ISR) CFM
Programmable thermostat for air EnergySt~ labeled $50/thermostatconditioner unit
Programmable Thermostats
Optimizer programmable EnergyStar(ID
thermostat for heat pumps or all unit
electric
labeled $70/thermostat
Variable frequency drives
(VFD)
HV AC fans and pumps
Beverage or refrigerated
display machine occupancy
sensor
:::; 100 hp HV AC fans or
pumps
HV AC fans and pumps See notes 4 and 5 below $80/hp
Beverage vending or
refrigerated display machine
occu anc sensor
$75/sensor
Notes for Table 3:
I) For retrofits of existing equipment, incentives are for one-for-one same size equipment replacements. Exception: PTACs
can replace electric resistive heating, which must be removed.2) Equipment that meets or exceeds all efficiency requirements listed for the size category in the above table may qualify for an
incentive.3) Incentives for heat pumps are $50 per ton of cooling capacity ONLY. No incentives are paid per ton of heating capacity.
Heat Pumps must meet both the cooling mode and heating mode efficiency requirements to qualify for per ton cooling
efficiency incentives.4) Throttling or bypass devices, such as inlet vanes, bypass dampers, three-way valves, or throttling valves must be removed or
permanently disabled to qualify for HV AC fan and pump VFD incentives.5) For New Construction, incentives are not available for HV AC fan and pump VFDs required by current version of the Idaho
energy code
6) SEER = Seasonal Energy Efficiency Ratio EER = Energy Efficiency Ratio COP = Coefficient of Performance
HSPF = Heating Seasonal Performance Factor IPL V = Integrated Part Load Value
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
H IJYM
c. No. 28 Original Sheet No. 117.
UTAH POWER & LIGHT COMPANY
ELECTRIC SERVICE SCHEDULE NO. 117
STATE OF IDAHO
Residential Refrigerator Recycling Program
PURPOSE: Service under this tariff is intended to decrease residential refrigeration loads
through the removal and recycling of inefficient models.
APPLICABLE: To existing residential customers in all territory served by the Company in
the State of Idaho billed on Schedule 1. Landlords who own appliances in rental properties served
by the company in the State of Idaho where the tenant is billed under Schedule 1 also qualify for
this program. This tariff will expire August 1 2007.
CUSTOMER PARTICIPATION: Customer participation is voluntary and is initiated by
contacting a specified toll-free telephone number or web site.
DESCRIPTION: Customers receive a $40 incentive to discontinue use of their working
second refrigerators and!or freezers or to replace their working primary refrigerators and freezers
with new more energy efficient models. To qualify for the incentive customers must give up their
appliances for recycling. Appliances will be collected and recycled to ensure they are not resold on
the secondary market. Company will offer a packet with written energy efficiency information and
instant savings measures.
QUALIFYING EQUIPMENT: Working refrigerators and freezers that are a minimum of
10 cubic feet in size, utilizing inside measurements.
PROVISIONS OF SERVICE: Incentives will be available on a maximum of two
appliances per qualifying household. Incentive checks will be mailed within 30 days of the
appliance collection date.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
OIJYM
c. No. 28 Original Sheet No. 117.
ELECTRIC SERVICE SCHEDULE NO. 117 - (Continued)
PROVISIONS OF SERVICE: (Continued)
Incentives are also available to landlords that own the appliances used in rental properties in
Utah Power s Idaho service territory where their tenant is billed on a residential schedule.
Landlords may receive incentives on a maximum of two appliances per unit.
ELECTRIC SERVICE REGULATIONS: Service under this schedule will be in
accordance with the terms of the Electric Service Agreement between the Customer and the
Company. The Electric Service Regulations of the Company on file with and approved by the
Idaho Public Utilities Commission, including future applicable amendments, will be considered as
forming a part of and incorporated in said Agreement.
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
HIJYM
C. No. 28
Fourth Revised Sheet No. 120.
Canceling Third Revised Sheet No. 120.
UTAH POWER & LIGHT COMPANY
ELECTRIC SERVICE SCHEDULE NO. 120
STATE OF IDAHO
NO NEW SERVICE
Commercial Energy Services
Optional to Qualifying Customers
PURPOSE: Service under this schedule is intended to reduce the energy requirements of new
Commercial Buildings and existing Commercial Buildings undergoing Major Renovation by promoting the
installation of Energy Conservation Measures.
APPLICABLE: Conservation Payments are not available to Owners after January 12, 2006. The
restriction on new service does not affect payment of Energy Service Charges currently required and
obligations pursuant to an executed Energy Services Contract remain in effect until the Conservation
Payment with interest is re-paid in full.
This program is applicable to service to new Commercial Buildings larger than 12 000 square feet
and existing commercial buildings undergoing Major Renovation under General Service Electric Service
Schedules in the State of Idaho. Warehouses and other New Commercial Buildings and existing
commercial buildings undergoing Major Renovation determined by Company to be suitable for a
prescriptive approach are excluded from this program and are included under Schedule 122.
Charges under this schedule will be in addition to the electric service charge under the Customer
applicable electric service schedule. THE OBLIGATIONS UNDER TillS SCHEDULE WILL APPLY
TO ALL CUSTOMERS USING ELECTRICITY AT THE REAL PROPERTY SPECIFIED BY AN
ENERGY SERVICES CONTRACT.
DESCRIPTION: Service under this program is available to improve the energy efficiency of New
Commercial Buildings larger than 12 000 square feet and existing Commercial Buildings undergoing Major
Renovation to be connected to Company s system on or after the effective date ofthis schedule.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
HIJYM
c. No. 28
Fourth Revised Sheet No. 120.
Canceling Third Revised Sheet No. 120.
ELECTRIC SERVICE SCHEDULE NO. 120 - (Continued)
DESCRIPTION: (Continued)
The Company will provide the Conservation Payments for incremental construction which result in the
installation of Energy Conservation Measures. Upon connection of electric service to commercial buildings
having such measures installed under this program, Company will bill the Customer an Energy Service
Charge as specified by this Schedule
DEFINITIONS:
Annual kWh Savings: The annual kWh savings resulting from installation of the Energy
Conservation Measures, as estimated by Company using engineering analysis.
Baseline Level: Electric energy use estimated to occur from compliance with current commercial
building code requirements for New Commercial Buildings or from implementation of the Owner s building
plans initially presented to Company, whichever is less.
Conservation Payments: Any payments of money made by Company to Owner for installation of
Energy Conservation Measures pursuant to an Energy Services Contract. If the Company has assisted in
implementing the Energy Conservation Measures, Conservation Payments also shall include Company
direct costs of such implementation, including the cost of materials, installation, and ongoing support as
specified in the Energy Services Contract. Conservation Payments shall be either:
(a) Level l Conservation Payments -- Conservation Payments which do not exceed the
Measure Funding Limit.
Level 2 Conservation Payments -- Conservation Payments which exceed the Measure
Funding Limit. The Level 2 Conservation Payments may not exceed, for any Energy
Services Contract, the amount of the Level l Conservation Payments nor shall the
maximum Level 2 Conservation Payments for any individual Conservation Measure be
more than three times the applicable Measure Funding Limit.
(b)
Customer: Any party who has applied for, been accepted and receives service at the real property
identified in the Energy Services Contract.
Energy Conservation Measures: Permanently installed measures specified in an Energy Services
Contract, which can reduce the Customer s electric energy use.
Energy Services Contract: A contract between Owner and Company providing for Company to
furnish or provide Conservation Payments with respect to Energy Conservation Measures pursuant to this
tariff Schedule.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
BlahHI.V
C. No. 28
Fourth Revised Sheet No. 122.
Canceling Third Revised Sheet No. 122.
UTAH POWER & LIGHT COMPANY
ELECTRIC SERVICE SCHEDULE NO. 122
STATE OF IDAHO
NO NEW SERVICE
Commercial Energy Services
Optional to Qualifying Customers
PURPOSE: Service under this schedule is intended to reduce the energy requirements of certain
commercial buildings by promoting the installation of Energy Conservation Measures through a prescriptive
approach.
APPLICABLE: Conservation Payments are not available to Owners after January 12, 2006. The
restriction on new service does not affect payment of Energy Service Charges currently required and
obligations pursuant to an executed Energy Services Contract remain in effect until the Conservation
Payment with interest is re-paid in full.
This program is applicable to service under the General Service Electric Service Schedules in the
State of Idaho to New Commercial Buildings and existing commercial buildings undergoing Major
Renovation with 12 000 square feet or less, new warehouses, and other New Commercial Buildings and
existing commercial buildings undergoing Major Renovation determined by Company to be suitable for a
prescriptive approach.
Charges under this schedule will be in addition to the electric service charge under the Customer
applicable electric service schedule. THE OBLIGATIONS UNDER TillS SCHEDULE WILL APPLY
TO ALL CUSTOMERS USING ELECTRICITY AT THE REAL PROPERTY SPECIFIED BY
ENERGY SERVICES CONTRACT.
DESCRIPTION: Service under this program is available to improve the energy efficiency of New
Commercial Buildings with 12 000 square feet or less, new warehouses, and other New Commercial
Buildings and existing commercial buildings undergoing Major Renovation determined by Company to be
suitable for a prescriptive approach. This program will utilize a prescriptive approach. Company will
provide to Owner a menu of recommended Energy Conservation Measures. From this menu, Owner will
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
Blah
IJIlV
c. No. 28
Fourth Revised Sheet No. 122.
Canceling Third Revised Sheet No. 122.
ELECTRIC SERVICE SCHEDULE NO. 122 - (Continued)
DESCRIPTION: (Continued)
select the specific Energy Conservation Measures which are to be installed in Owner s Commercial Building
and for which the Company will provide Conservation Payments. Upon connection of electric service to
commercial buildings having such measures installed under this program, Company will bill the Customer
an Energy Service Charge as specified by this Schedule.
DEFINITIONS:
Annual kWh Savings: The annual kWh savings resulting from installation of the Energy
Conservation Measures, as estimated by Company using engineering analysis.
Conservation Payments: Any payments of money made by Company to Owner for installation of
Energy Conservation Measures pursuant to an Energy Services Contract. Conservation Payments shall be
either:
(a)Levell Conservation Payments -- Conservation Payments which do not exceed the Measure
Funding Limit.
(b)Level 2 Conservation Payments -- Conservation Payments which exceed the Measure
Funding Limit. The Level 2 Conservation Payments may not exceed, for any Energy
Services Contract, the amount of the Level l Conservation Payments nor shall the
maximum Level 2 Conservation Payments for any individual Conservation Measure be
more than three times the applicable Measure Funding Limit.
Customer: Any party who has applied for, been accepted and receives service at the real property
identified in the Energy Services Contract.
Energy Conservation Measures: Permanently installed measures specified in an Energy Services
Contract, which can reduce the Customer s electric energy use.
Energy Services Contract: A contract between Owner and Company providing for Company to
furnish or provide Conservation Payments with respect to Energy Conservation Measures pursuant to this
tariff Schedule.
Major Renovation: Replacement of the major components of the building s envelope which must
include replacement measures for over 50 percent of all external window or uninsulatab1e wall area.
Melded Interest Rate: An interest rate which is the sum of the interest rates specified in (a) and
(b) be10w-
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
HIJYM
c. No. 28 Original Sheet No. 155.
UTAH POWER & LIGHT COMPANY
AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155
STATE OF IDAHO
Optional for Qualifying Customers
PURPOSE: Service under this Schedule is intended to maximize the efficient utilization
of the electricity requirements of new and existing loads in agricultural irrigation systems and
irrigation district pumping systems by promoting electric energy-efficient irrigation practices and
the installation of Energy Efficiency Measures. Service under this Schedule is subject to funds
availability.
APPLICABLE: To service under the Company s Irrigation and Soil Drainage Pumping
Power Service Schedule 10, and to any customer who qualifies as a "Farm Load" under the
Pacific Northwest Electric Power Planning and Conservation Act, P.L. 96-501 and receives
electric service on a retail schedule in all territory served by the Company in the State of Idaho.
DEFINITIONS:
Annual kWh Savings: The annual kilowatt-hour (kWh) savings resulting from
installation of the Energy Efficiency Measures or improved equipment operation
as estimated by the Program Administrator or Company.
Average Monthly On Peak kW Savings: The Average Monthly On Peak
kilowatt (kW) savings resulting from the installation of Energy Efficiency
Measures or improved equipment operation as estimated by Program
Administrator or Company using engineering analysis as described below:
Average Monthly On Peak kW Savings = (baseline average monthly On Peak kW
- proposed average monthly On Peak kW), where;
=? Average Monthly On Peak kW = sum of the 12 Monthly Maximum On Peak
kW/12, where;
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
HIJYM
c. No. 28 Original Sheet No. 155.
AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 (Continued)
DEFINITIONS: (Continued)
Monthly Maximum On Peak kW = highest of all 15 minute average kW (as
determined below) for On Peak hours. On Peak hours are those hours
specified in the electric service schedule under which the customer receives
electric service.
15 minute average kW = sum of kWh used over 0.25 hrs/0.25 hrs
Baseline Adjustments: Program Administrator or Company may adjust baseline
electric energy consumption and costs during engineering analysis to reflect any of
the following: standard practice, changes in capacity, changes in production or
system use and equipment at the end of its useful life.
Customer: Any party who has applied for, been accepted and receives service at
the real property, is the owner of the real property, or is the electricity user at the
real property.
Energy Efficiency Incentive: Payment of money made by Program
Administrator or Company to Customer for installation of Energy Efficiency
Measures pursuant to an executed Energy Efficiency Incentive Agreement or
approved Application.
Energy Efficiency Incentive Agreement: An agreement between Customer and
Program Administrator or Company providing for Program Administrator or
Company to furnish Energy Efficiency Incentive with respect to Energy Efficiency
Measures pursuant to this tariff Schedule.
Energy Efficiency Incentive Application: An application provided by the
Program Administrator or Company, completed by the Customer and approved by
the Program Administrator or Company requesting the Program Administrator or
Company furnish Energy Efficiency Incentives with respect to Energy Efficiency
Measures pursuant to this Schedule.
Energy Efficiency Measure (EEM): Permanently installed measure specified in
an Energy Efficiency Incentive Agreement or Application which can improve the
efficiency of the Customer s electric energy use.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
HIJYM
C. No. 28 Original Sheet No. 155.
AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 (Continued)
DEFINITIONS: (Continued)
Energy Efficiency Project: One or more EEM(s) covered by one Energy
Efficiency Incentive Agreement or Application.
Energy Efficiency Measure (EEM) Cost:
New Construction: EEM Cost is the total installed cost of the energy efficient
equipment or system minus the cost of the required!common practice equipment
or system.
Major System Upgrades: EEM Cost is the total installed cost of the energy
efficient equipment or system minus the cost of the required!common practice
equipment or system.
Retrofit: EEM Cost is the total installed cost of the energy efficient equipment or
modification.
In the case of New Construction, Major System Upgrades and Retrofits, EEM
Costs shall mean the Customer s reasonable costs incurred (net of any discounts
rebates or incentives other than Energy Efficiency Incentives available under this
Schedule or United States Department of Agriculture (USDA) Environmental
Quality Incentives Program (EQIP) incentives, or other consideration that reduces
the final actual EEM Cost incurred by the Customer) to purchase and install
EEMs at the Customer s facility. If the Customer installs the EEM, then the cost
of installation shall be equal to the Customer s reasonable and realistic actual
labor costs for such installation.
New Construction: New irrigation piping, pumping, or system to provide
irrigation for existing irrigated acreage or loads.
Major System Upgrades: Changes, modifications or additions to existing
irrigation systems or equipment that involve substantial removal and replacement
with new systems or equipment where such changes, modifications or additions
are required to replace equipment at the end of its useful life, add capacity or
change the utilization of the acreage or loads.
Program Administrator: Qualified person or entity hired by the Company to
administer this Schedule.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8 , 2006 EFFECTIVE: January 12 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
Blah
H IJYM
c. No. 28 Original Sheet No. 155.4
AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 (Continued)
DEFINITIONS: (Continued)
Retrofit: Changes, modifications or additions to systems or equipment serving
existing acreage or loads.
INCENTIVES FOR EEMS:
Nozzle exchange: Program Administrator or Company shall establish procedures
and requirements for a nozzle exchange program allowing Customer to exchange
existing nozzles, gasket and drains for appropriately sized new and like
equipment. Nozzle exchange procedures, and requirements will be posted on the
Company web site. Equipment installed on pivot or linearllateral systems will not
be eligible for Energy Efficiency Incentives under the Nozzle exchange portion of
this Schedule, but will be eligible for amounts listed in Table lor, if not listed
based on the Energy Efficiency Incentives energy, demand and cost formula
below.
Energy Efficiency Incentives: Program Administrator or Company shall
establish procedures and requirements for providing Energy Efficiency Incentives
to Customers which shall be posted on the Company web site. Energy Efficiency
Incentives include amounts listed in Table 1 and amounts available according to
the energy, demand and cost formula listed below. All proposed Energy
Efficiency Projects are subject to Program Administrator or Company approval
prior to offering an Energy Efficiency Incentive Agreement or Application.
Program Administrator or Company will establish Energy Efficiency Project
approval criteria and post the criteria on the Company web site.
For all EEMs not eligible under the Nozzle exchange or listed in Table 1 , Energy
Efficiency Incentives made available for installation of EEMs pursuant to an
Energy Efficiency Incentive Agreement or Application shall be shall be the lesser
ofthe sum of (a) and (b) OR (c):(a) $0.12 /kWh for the Annual kWh savings as determined using Program
Administrator or Company provided or approved engineering analysis;
$50/kW for Average Monthly On Peak kW savings determined using
Program Administrator or Company provided or approved engineering
analysis.
50% of the EEM Cost as determined by the Program Administrator or
Company.
(b)
(c)
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
HIJYM
C. No. 28 Original Sheet No. 155.
AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 (Continued)
INCENTIVES FOR EEMS: (Continued)
Energy Efficiency Incentives may be adjusted such that Customer does not receive
more than 100% of EEM Costs in total incentives including incentives available
under this Schedule and EQIP incentives.
All proposed EEM Costs are subject to Program Administrator or Company
review and approval prior to offering an Energy Efficiency Incentive Agreement
or approving an Application. All final EEM Costs are subject to Program
Administrator or Company review and approval prior to paying an Energy
Efficiency Incentive per the terms of an Energy Efficiency Incentive Agreement or
approved Application. Program Administrator or Company review and approval
of EEM Costs may require additional documentation from the Customer.
The Customer may receive only one Energy Efficiency Incentive under this
Schedule per EEM.
PROVISIONS OF SERVICE:
(1)Energy Analysis
Program Administrator or Company shall meet with Customer and any
design team and may perform an initial site visit/plans review to determine
what EEMs may be appropriate for an energy analysis. The energy
analysis may include a visual pump check, water management
consultation, pump testing, and/or irrigation/pump system analysis.
At the conclusion of the visual pump check and water management
consultation, the Customer may be asked to sign an approval to proceed to
the next step in the program and to commit to implement operational
improvements identified in the water management consultation. If
Customer signs the approval, Customer will receive an irrigation/pump
system analysis, an incentive offer if potential upgrades are identified, and
post-installation testing of installed system.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12, 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulah
HIJYM
c. No. 28 Original Sheet No. 155.
AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 (Continued)
PROVISIONS OF SERVICE: (Continued)
(2)
(3)
(4)
EEM Inspection
Program Administrator or Company may inspect any EEMs which are
funded by or installed under this program. Satisfactory inspection by
Program Administrator or Company will be required prior to receiving
Energy Efficiency Incentives specified in the Energy Efficiency Incentive
Agreement or approved Application.
Measure Performance VerificationlEvaluation
Program Administrator and!or Company may verify or evaluate the energy
savings of installed Energy Efficiency Measures specified in the Energy
Efficiency Incentive Agreement or approved Application, nozzles or
equipment received as part of the Nozzle Exchange, and!or improved
equipment operation. This verification may include a telephone survey,
site visit, review of system operating characteristics, and pre- and post-
installation of monitoring equipment as necessary to quantify actual energy
saVIngs.
Energy Efficiency Incentives will not be made available to induce fuel
switching by Customer.
ELECTRIC SERVICE REGULATIONS: Service under this Schedule is subject to
the General Rules and Regulations contained in the tariff of which this Schedule is a part, and to
those prescribed by regulatory authorities.
(Continued)
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
Blah
H IJYM
C. No. 28 Original Sheet No. 155.
AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 (Continued)
Category
Table 1. Pivot E
Replace
Pivot Span Low
Pressure Drains
Sprinkler PressureRe lators
Sprinkler Package
Existing pivot low pressure
drains
Existing sprinkler pressure
re ulators
Existing sprinkler package
with design flow 2: 8.5
m/acre
Existing sprlllider package
with a design flow 2: 7.
m/acre.
New low pressure drain replacement parts or
entire drain assemblies
New sprinkler pressure regulators with the
same or lower outlet desi ressure
New sprinkler package with a design flow::;
7.5 gpm/acre
Customer
incentive
$4/each
$6/each
$900 per
center pivot
Dual Sprinkler
Packages
Dual sprinkler head assemblies and a second
sprinkler package with a design flow::; 5.5
m/acre
$500 per
center pivot
Notes for Table 1:
1). All sprllliders on a center pivot must be replaced to qualify for incentives. 2). Minimwn 80 heads
maximwn 170 heads per center pivot. 3). Drop tubes and new pressure regulators are considered part of the
new sprinkler package and are not eligible for individual incentives. 4). Drains, pressure regulators and
sprinkler packages installed on linear or lateral systems shall also be eligible for incentives.
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: January 12 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary
ulahHI.II
C. No. 28 Original Sheet No. 191
UTAH POWER & LIGHT COMPANY
ELECTRIC SERVICE SCHEDULE NO. 191
STATE OF IDAHO
Customer Efficiency Services Adjustment
PURPOSE: The Customer Efficiency Services Adjustment is designed to recover the costs
incurred by the Company associated with Commission-approved demand-side management expenditures.
APPLICATION: This Schedule shall be applicable to all retail tariff Customers taking service
under the Company s electric service schedules.
MONTHLY BILL: In addition to the Monthly Charges contained in the Customer s applicable
schedule, all monthly bills shall have the following percentage increases applied prior to the application of
electric service Schedule 34.
Schedule 1
Schedule 6
Schedule 6A
Schedule 7
Schedule 7 A
Schedule 8
Schedule 9
Schedule 10
Schedule 11
Schedule 12 - Street Lighting
Schedule 12 - Traffic Signal
Schedule 19
Schedule 23
Schedule 23A
Schedule 35
Schedule 35A
Schedule 36
1.50 %
1.50 %
50%
50%
50%
50%
50%
1.50 %
50%
50%
50%
50%
1.50 %
50%
50%
1.50 %
1.50 %
Submitted Under Order No. 29976
ISSUED: March 8, 2006 EFFECTIVE: May 1 2006
IDAHO PUBLIC UTILITIES COMMISSION
Approved Effective
March 17, 2006 Jan. 12, 2006
Per O.N. 29976
Jean D. Jewell Secretary