Loading...
HomeMy WebLinkAbout20141001PAC to Staff Attach 14-1.pdf I.P.U.C. No. 1 First Revision of Sheet No. 21.1 Canceling Original Sheet No. 21.1 Submitted Under Docket No. PAC-E-06-10 - Advice Letter No. 07-03 ISSUED: January 10, 2007 EFFECTIVE: April 1, 2007 ROCKY MOUNTAIN POWER ELECTRIC SERVICE SCHEDULE NO. 21 STATE OF IDAHO ______________ Low Income Weatherization Services Optional For Income Qualifying Customers _____________ PURPOSE: Service under this schedule is intended to maximize the efficient utilization of the electricity requirements of existing residential dwellings inhabited by customers that meet income guidelines through the installation of energy efficient materials. The decision to extend service under this schedule shall be based upon the eligibility requirements contained herein. AVAILABILITY: This tariff is applicable to residential customers in all territory served by the Company in the state of Idaho. 1. ENERGY CONSERVATION SERVICE TO LOW INCOME CUSTOMERS: This program is available to existing single family and multi-family residential units. It is intended to reduce the electricity requirements and increase the penetration of weatherization and electric efficiency measures in residential dwellings inhabited by low income households through the installation of permanent energy efficiency materials. The decision to extend service under this schedule shall be based on eligibility requirements contained herein. A. Definitions: 1. "Dwelling" is real or personal property within the state inhabited as the principal residence of a dwelling owner or a tenant. “Dwelling” includes a manufactured home, a single-family home, duplex or multi-unit residential housing. “Dwelling” does not include a recreational vehicle. a. Duplexes and fourplexes are eligible if at least one half of the dwelling is occupied by low income tenants. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 1 of 29 I.P.U.C. No. 1 Second Revision of Sheet No. 21.2 Canceling First Revision of Sheet No. 21.2 Submitted Under Case No. PAC-E-10-07 ISSUED: December 28, 2010 EFFECTIVE: December 28, 2010 ELECTRIC SERVICE SCHEDULE NO. 21 – (Continued) A. Definitions (Continued): b. Triplexes and multi-family dwellings are eligible if at least 66% of the units are occupied by low income tenants. 2. "Agency" means a non-profit group, Municipality or County authorized to receive funds for installation of energy efficiency materials in low income properties. 3. "Low Income" means households qualifying under the Federal low income guidelines and certified for eligibility according to agency procedure. Income eligibility is based on 150% of federal poverty guidelines. 4. "Major Measure" means ceiling insulation, wall insulation, floor insulation and window replacements applicable in dwellings with permanently installed electric space heating systems. When cost-effective (Savings to Investment Ratio (“SIR”) of 1.0 or greater as determined by a U.S. Department of Energy (“DOE”) approved energy audit), all major measures must be installed or in place or financial assistance under this schedule will not be offered. If physical barriers exist that prohibit the installation of a measure, then the measure is not required as a condition for financial assistance under this schedule. 5. "Supplemental Measures and Additional Measures" are not required measures under this schedule, but may qualify for a Company reimbursement. B. Financial Assistance: 1. The Company will reimburse Agency 85% of the installed cost of all eligible Energy Conservation Measures listed in Section C of this Tariff. Reimbursements on weatherized homes will be provided one time only on any individual measure, and up to two times per dwelling. An incentive will be provided a second time only on dwellings originally treated before October 1, 1993. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 2 of 29 I.P.U.C. No. 1 Third Revision of Sheet No. 21.3 Canceling Second Revision of Sheet No. 21.3 Submitted Under Case No. GNR-E-12-01 ISSUED: May 15, 2013 EFFECTIVE: June 1, 2013 ELECTRIC SERVICE SCHEDULE NO. 21 - Continued B. Financial Assistance (Continued): 2. The Company will reimburse Agency for administrative costs based on 15% of Rocky Mountain Power’s rebate on installed measures, not to exceed the following total administrative payment per building: Dwelling Units in Building Maximum Administrative Payment 1 to 4 $350 5 to 10 $800 11 to 15 $1200 16 to 20 $1400 21 to 25 $1600 26 to 30 $1800 31+ $2100 The minimum reimbursement will be $150 on homes with one or more Major Measure installed and $50 on homes without the installation of a Major Measure. 3. Agencies must invoice Company within 120 days of job completion. 4. A maximum of $300,000 in Company reimbursements will be available annually (April 1 through March 31). Reimbursements related to health and safety measures are limited to 15% of the annual cost of total jobs performed by each agency. 5. Annual funding of $25,000 in total will be provided to Eastern Idaho Community Action Partnership and SouthEastern Idaho Community Action Agency for conservation education. C. Energy Conservation Measures: Financial assistance will be provided based on the results of a cost effective analysis through a Department of Energy approved energy audit. The energy efficient measures eligible for funding must be installed in dwellings with permanently installed operable electric space heat except where noted. All Major and Supplemental Measures indicated below may qualify for a company reimbursement when audit results indicate a measure has a Savings to Investment Ratio of 1.0 or greater. The energy efficient measures that may be eligible for funding are listed as follows: Major Measures – Electric Heating System Required: 1. Ceiling insulation up to R-48 for ceilings with less than R-30 in place. R-30 or better attics will not be further insulated. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 3 of 29 I.P.U.C. No. 1 First Revision of Sheet No. 21.4 Canceling Original Sheet No. 21.4 Submitted Under Docket No. PAC-E-06-10 – Advice Letter No. 07-03 ISSUED: January 10, 2007 EFFECTIVE: April 1, 2007 ELECTRIC SERVICE SCHEDULE NO. 21 - Continued C. Energy Conservation Measures: (Continued) 2. Floor insulation over unheated spaced up to R-30. 3. Wall insulation up to R-26 for walls with no insulation installed (financing will not be available for the installation of urea-formaldehyde wall insulation). 4. Replacement windows with a U-value of 0.35 or less. Nothing shall preclude the Company from providing a reimbursement for the installation of a greater R value on insulation for the above items that are determined to be cost effective (SIR is 1.0 or greater) through the audit process. Supplemental Measures – Electric Heating System Required: 1. Attic ventilation excluding power ventilators, whole house mechanical ventilation and spot ventilation for kitchen and baths. 2. Ground cover and water pipe wrap in homes with an electric water heater. 3. Forced air electric space heating duct insulation and sealing in unheated spaces. 4. Weather stripping and/or caulking, including blower door assisted air sealing and duct sealing. 5. Thermal doors. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 4 of 29 I.P.U.C. No. 1 First Revision of Sheet No. 21.5 Canceling Original Sheet No. 21.5 Submitted Under Docket No. PAC-E-06-10 – Advice Letter No. 07-03 ISSUED: January 10, 2007 EFFECTIVE: April 1, 2007 ELECTRIC SERVICE SCHEDULE NO. 21 - Continued C. Energy Conservation Measures: (Continued) Supplemental Measures – Electric Heating System Required (continued) 6. Timed thermostats on centrally controlled multi-room heating/cooling systems except when used with heat pumps. Heat anticipating type thermostats for zonal electric resistance heating systems. 7. Storm Windows 8. Electric furnace repair and replacement. Additional Measures – No Electric Heating System Requirement: 1. Pipe insulation, energy efficient showerheads and aerators where electric water heaters are present. 2. Compact fluorescent light bulbs applicable in all homes – limit 8 Energy Star certified bulbs per home placed in fixtures that are on 2 hours or more per day. 3. Existing Refrigerator models with annual usage listed in the Weatherization Assistance Program Technical Assistance center database as 900 kWh or greater may be replaced with an Energy Star model with estimated annual consumption of 500 kWh or less. Replaced refrigerators must be removed and recycled in accordance with EPA guidelines. 4. Electric water heater repair and replacement. 5. Measures that promote health and safety related to electricity usage. D. Provisions of Service for Energy Conservation Service to Low Income Customers: 1. Measures installed are intended to improve upon the electric efficiencies of participating homes and must be included in the U.S. Department of Energy’s Weatherization Assistance Program available to Agency. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 5 of 29 I.P.U.C. No. 1 First Revision of Sheet No. 21.6 Canceling Original Sheet No. 21.6 Submitted Under Docket No. PAC-E-06-10 – Advice Letter No. 07-03 ISSUED: January 10, 2007 EFFECTIVE: April 1, 2007 ELECTRIC SERVICE SCHEDULE NO. 21 – (Continued) D. Provisions of Service for Energy Conservation Service to Low Income Customers: (Continued) 2. A DOE-approved energy audit must be completed by the Agency prior to installation of Major and Supplemental Measures. 3. Agency must qualify residential customers for assistance using the Federal low income guidelines. 4. Installation shall meet Federal, state and local building codes. 5. Measures installed under this schedule shall not receive financial incentives from other Company programs. 6. Agency shall inspect the installation to insure that the services meet or exceed required specifications. 7. Company may audit Agency weatherization and financial records and inspect the installations in dwellings of customers receiving services under this program 8. Company shall pay Agency the amount established under the terms of their contract when provisions of this schedule have been met. ELECTRIC SERVICE REGULATIONS: Service under this schedule is subject to the Electric Service Regulations of the Company on file with and approved by the Idaho Public Utilities Commission, including future applicable amendments and additional regulations prescribed by regulatory authorities. ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 6 of 29 Third Revision of Sheet No. 115.1 I.P.U.C. No. 1 Canceling Second Revision of Sheet No. 115.1 Submitted Under Case No. PAC-E-12-10 ISSUED: May 15, 2012 EFFECTIVE: July 14, 2012 ROCKY MOUNTAIN POWER ELECTRIC SERVICE SCHEDULE NO. 115 STATE OF IDAHO ______________ FinAnswer Express ______________ PURPOSE: Service under this Schedule is intended to maximize the efficient utilization of the electricity requirements of new and existing loads in Commercial Buildings and Industrial Facilities through the installation of Energy Efficiency Measures. Service under this Schedule is subject to funding availability. APPLICABLE: To service under the Company's General Service Schedules 6, 6A, 7, 7A, 9, 12, 19, 23, 23A, 24, 35 and 35A in all territory served by the Company in the State of Idaho. This Schedule is applicable to new and existing Commercial Buildings and Industrial Facilities and dairy barns served under the Company’s residential rate schedules. CUSTOMER PARTICIPATION: Customer participation is voluntary and is initiated by following the participation procedures on the Idaho energy efficiency program section of the Company website, and available to customers without online access upon request. DESCRIPTION: Ongoing program to provide incentives for a variety of equipment and services intended for and located in commercial buildings and industrial facilities. Periodic program changes will be made to insure or enhance program cost-effectiveness as defined by the Company. QUALIFYING EQUIPMENT OR SERVICES: Equipment or services which when installed or performed in an eligible facility result in verifiable electric energy efficiency improvement compared to existing equipment or baseline equipment as defined by the Company. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 7 of 29 Second Revision of Sheet No. 115.2 I.P.U.C. No. 1 Canceling First Revision of Sheet No. 115.2 Submitted Under Case No. PAC-E-12-10 ISSUED: May 15, 2012 EFFECTIVE: July 14, 2012 ELECTRICAL SERVICE SCHEDULE NO. 115 (Continued) PROVISIONS OF SERVICE: (1) Qualifying equipment or services, incentive amounts and other terms and conditions will be listed on the Idaho energy efficiency program section of the Company website, and are available to customers without online access upon request. Program changes may be made by the Company with at least 45 days advanced notice. Such changes will be prominently displayed on the Idaho energy efficiency program section of the Company website and include a minimum 45 days for processing prior offers. (2) Company may elect to offer EEM incentives through different channels and at different points in the sales process other than individual Energy Efficiency Incentive Agreement(s) prior to EEM purchase. The differences will depend on EEM and will be consistent for all EEMs of similar type. (3) Incentives may be offered year-round or for selected time periods. (4) Equipment or services receiving an incentive under this program are not eligible for incentives under other Company programs. (5) Company may offer payment as described in the Idaho energy efficiency program section of the Company website to design team members to encourage early initial Company consultation on Owner/Customer design and plans for New Construction/Major Renovation. (6) Company will employ a variety of quality assurance techniques during the delivery of the program. They will differ by EEM and may include pre- and post- installation inspections, phone surveys, and confirmation of Owner/Customer and equipment eligibility. (7) Company may verify or evaluate the energy savings of installed EEMs. This verification may include a telephone survey, site visit, review of facility operation characteristics, and pre- and post-installation of monitoring equipment as necessary to quantify actual energy savings. ELECTRIC SERVICE REGULATIONS Service under this Schedule will be in accordance with the terms of the Electric Service Agreement between the Customer and the Company. The Electric Service Regulations of the Company on file with and approved by the Idaho Public Utility Commission, including future applicable amendments, will be considered as forming a part of and incorporated in said Agreement. ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 8 of 29 I.P.U.C. No. 1 Second Revision of Sheet No. 117.1 Canceling First Revision of Sheet No. 117.1 Submitted Under Advice Letter No. 14-01 ISSUED: May 22, 2014 EFFECTIVE: July 1, 2014 ROCKY MOUNTAIN POWER ELECTRIC SERVICE SCHEDULE NO. 117 STATE OF IDAHO ______________ Residential Refrigerator Recycling Program _____________ PURPOSE: Service under this tariff is intended to decrease residential refrigeration loads through the removal and recycling of inefficient models. Service under this Schedule is subject to funds availability. APPLICABLE: To all retail tariff Customers taking service under the Company’s electric service schedules listed on Schedule 191, or property owners, landlords, property management companies and homeowner associations not listed as the primary account holder on a qualifying rate, in all service territory served by the Company in Idaho. CUSTOMER PARTICIPATION: Customer participation is voluntary and is initiated by contacting a specified toll-free telephone number or website. DESCRIPTION: Participants receive an incentive to discontinue use of their working secondary refrigerator and/or freezer or to replace their working primary refrigerator and freezer with new more energy efficient model. To qualify for the incentive customers must give up their appliances for recycling. Appliances will be collected and recycled to ensure they are not resold on the secondary market. QUALIFYING EQUIPMENT: Working residential refrigerators and freezers that are a minimum of 10 cubic feet and a maximum of 32 cubic feet in size, utilizing inside measurements. PROVISIONS OF SERVICE: 1. Residential, commercial and industrial customers will receive an incentive of $50 for each eligible refrigerator and/or freezer. Incentives will be available on a maximum of two appliances per qualifying customer per year. The Company may offer a packet with written energy efficiency information and instant savings measures. 2. Participating retailers will receive an incentive of up to $20 for each eligible refrigerator and/or freezer. 3. Incentive checks will be mailed within 30 days of the appliance collection date. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 9 of 29 First Revision of Sheet No. 117.2 I.P.U.C. No. 1 Canceling Original Sheet No. 117.2 Submitted Under Advice Letter No. 14-01 ISSUED: May 22, 2014 EFFECTIVE: July 1, 2014 ELECTRIC SERVICE SCHEDULE NO. 117 – (Continued) ELECTRIC SERVICE REGULATIONS: Service under this schedule will be in accordance with the terms of the Electric Service Agreement between the Customer and the Company. The Electric Service Regulations of the Company on file with and approved by the Idaho Public Utilities Commission, including future applicable amendments, will be considered as forming a part of and incorporated in said Agreement. ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 10 of 29 I.P.U.C. No. 1 Original Sheet No. 118.1 Submitted Under Advice Letter No. 06-06 ISSUED: August 14, 2006 EFFECTIVE: September 15, 2006 ROCKY MOUNTAIN POWER ELECTRIC SERVICE SCHEDULE NO. 118 STATE OF IDAHO ______________ Home Energy Saver Incentive Program _____________ PURPOSE: Service under this tariff is intended to maximize the efficient utilization of the electricity requirements of new and existing loads in new and existing residences including manufactured housing and multi-family dwellings. APPLICABLE: To new and existing residential customers in all territory served by the Company in the state of Idaho billed on Schedule 1 or Schedule 36. Landlords who own rental properties served by the company in the state of Idaho where the tenant is billed on Schedule 1 or Schedule 36 also qualify for this program. CUSTOMER PARTICIPATION: Customer participation is voluntary and is initiated by following the participation procedures listed on the program web site. DESCRIPTION: On-going program to deliver incentives for a variety of equipment and services intended for and located in residential dwellings. Home Energy Saver Incentive program will be delivered by the Program Administrator and periodic changes will be made to insure or enhance program cost effectiveness as defined by the Company. QUALIFYING EQUIPMENT OR SERVICES: Equipment or services for residential dwellings, which when correctly installed or performed, result in verifiable electric energy usage reductions where such usage is compared to the existing equipment or baseline equipment as determined by the Company. PROGRAM ADMINISTRATOR: Qualified person or entity hired by the Company to administer this program. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 11 of 29 I.P.U.C. No. 1 Original Sheet No. 118.2 ELECTRIC SERVICE SCHEDULE NO. 118 - Continued Submitted Under Advice Letter No. 06-06 ISSUED: August 14, 2006 EFFECTIVE: September 15, 2006 PROVISIONS OF SERVICE: 1. Qualifying Equipment or Services, incentive amounts, and participation procedures will be listed on the program Web site. 2. Incentive delivery may vary by technology and may include any or all of the following; post purchase mail-in, point-of-purchase buy-down, manufacturer buy- down or pre- purchase offer and approval. 3. Incentives may be offered for year-round or for selected time periods. 4. Incentive offer availability, incentive levels and Qualifying Equipment or Services may be changed by the Program Administrator after consultation with the Company to reflect changing codes and standards, sales volumes, quality assurance data or to enhance program cost effectiveness. 5. All changes will occur with a minimum of 45 days notice, be prominently displayed as a change, include a minimum 45 day grace period for processing prior offers (except for manufacturer buy-down incentive delivery) and be communicated at least once to retailers who have participated within the last year. 6. Incentives paid directly to customers will be in the form of a check issued within 45 days of Program Administrator’s receipt of a complete and approved incentive application. 7. Company and/or Program Administrator will employ a variety of quality assurance techniques during the delivery of the program. They may differ by equipment or service type and may include, but are not limited to, pre and post installation inspections, phone surveys, retailer invoice reconciliations and confirmation of customer and equipment eligibility. 8. Company may verify or evaluate the energy savings of installed equipment or services. Verification or evaluation may include, but are not limited to, telephone survey, site visit, billing analysis, pre- and post-installation of monitoring equipment as necessary to quantify actual energy savings. ELECTRIC SERVICE REGULATIONS: Service under this schedule will be in accordance with the terms of the Electric Service Agreement between the Customer and the Company. The Electric Service Regulations of the Company on file with and approved by the Idaho Public Utilities Commission, including future applicable amendments, will be considered as forming a part of and incorporated in said Agreement. ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 12 of 29 First Revision of Sheet No. 125.1 I.P.U.C. No. 1 Canceling Original Sheet No. 125.1 Submitted Under Advice No. 08-03 ISSUED: May 15, 2008 EFFECTIVE: May 1, 2008 ⇒ ⇒ ⇒ ROCKY MOUNTAIN POWER ELECTRIC SERVICE SCHEDULE NO. 125 STATE OF IDAHO ______________ Energy FinAnswer ______________ PURPOSE: Service under this schedule is intended to maximize the efficient utilization of the electricity requirements of new and existing loads in Commercial and Industrial Facilities by promoting the installation of Energy Efficiency Measures. APPLICABLE: To service under the Company's General Service Schedules 6, 6A, 8, 9, 12, 19, 23, 23A, 24, 35 and 35A in all territory served by the Company in the State of Idaho. This Schedule is not applicable to existing Commercial Buildings under 20,000 square feet. This schedule is applicable to dairy barns served on the Company’s residential rate schedules. Square footage is the total Building or Facility area served by the Company’s meter(s). DEFINITIONS: Annual kWh Savings: The annual kilowatt-hour (kWh) savings resulting from installation of the Energy Efficiency Measures, as estimated by Company using engineering analysis. Average Monthly kW Savings: The Average Monthly kilowatt (kW) savings resulting from the installation of Energy Efficiency Measures as estimated by Company using engineering analysis as described below: Average Monthly kW Savings = (baseline average monthly kW - proposed average monthly kW), where; Average monthly kW = sum of the 12 Monthly Maximum kW/12, where; Monthly Maximum kW = highest of all 15 minute average kW (as determined below). 15 minute average kW = sum of kWh used over 0.25 hrs/0.25 hrs (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 13 of 29 I.P.U.C. No.1 Original Sheet No 125.2 Submitted Under Case No. PAC-E-08-01 ISSUED: February 14, 2008 EFFECTIVE: May 1, 2008 ELECTRIC SERVICE SCHEDULE NO 125 – Continued DEFINITIONS: (continued) Baseline Level: Baseline Adjustments: Company may adjust baseline electric energy consumption and costs during engineering analysis to reflect any of the following: energy codes, standard practice, changes in capacity, changes in production or facility use and equipment at the end of its useful life. For existing fixtures, baseline wattages for all fluorescent lighting Energy Efficiency Measures in all facilities shall be the lesser of existing equipment or the energy efficiency magnetic ballast and energy savings lamp combination. Commercial Building: A structure that is served by Company and meets the applicability requirements of this tariff at the time an Energy Efficiency Incentive Agreement is executed which does not meet the definition of an Industrial Facility. Commissioning: The process of verifying and documenting that the performance of electric energy using systems meets the design intent and Owner’s operational requirement. Customer: Any party who has applied for, been accepted and receives service at the real property, or is the electricity user at the real property. Energy Efficiency Incentive: Payment of money made by Company to Owner or Customer for installation of an Energy Efficiency Project pursuant to an executed Energy Efficiency Incentive Agreement. Energy Efficiency Incentive Agreement: An agreement between Owner or Customer and Company providing for Company to furnish Energy Efficiency Incentive with respect to an Energy Efficiency Project pursuant to this tariff Schedule. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 14 of 29 I.P.U.C. No. 1 Original Sheet No. 125.3 Submitted Under Case No PAC-E-08-01 ISSUED: February 14, 2008 EFFECTIVE: May 1, 2008 ELECTRIC SERVICE SCHEDULE NO 125 – Continued DEFINITIONS: (continued) Energy Efficiency Measure (EEM): Permanently installed measure specified in an Energy Efficiency Incentive Agreement which can improve the efficiency of the Customer's electric energy use. EEMs designed to primarily reduce Average Monthly kW must also improve the electric energy efficiency to be eligible for Energy Efficiency Incentives. Energy Efficiency Measure (EEM) Cost: New construction: EEM Cost is the total installed cost of energy efficiency equipment or system minus the cost of the code compliance/common practice equipment or system. Major renovation: EEM Cost is the total installed cost of the energy efficient equipment or system minus the cost of the code compliance/common practice equipment or system. Retrofit: EEM Cost is the total installed cost of the energy efficiency equipment or modification. In the case of new construction, major renovation and retrofits, EEM Costs shall mean the Owner or Customer’s reasonable costs incurred (net of any discounts, rebates or incentives other than Energy Efficiency Incentives from the Company, or other consideration that reduces the final actual EEM Cost incurred by the Owner or Customer) to purchase and install EEMs at the Owner or Customer’s facility. If the Owner or Customer installs the EEM then the cost of installation shall be equal to the Owner’s or Customer’s actual labor costs for such installation. Energy Efficiency Project: One or more EEM(s) covered by one Energy Efficiency Incentive Agreement. Annual kWh and Average Monthly kW savings for an Energy Efficiency Project shall be the sum of the individual EEM values. Energy Efficiency Project Cost: Energy Efficiency Project Cost shall be the sum of the individual EEM costs. Industrial Facility: Buildings and process equipment associated with manufacturing. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 15 of 29 I.P.U.C. No. 1 Original Sheet No. 125.3 Submitted Under Case No PAC-E-08-01 ISSUED: February 14, 2008 EFFECTIVE: May 1, 2008 ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 16 of 29 I.P.U.C. No. 1 Original Sheet No. 125.4 Submitted Under Case No. PAC-E-08-01 ISSUED: February 14, 2008 EFFECTIVE: May 1, 2008 ELECTRIC SERVICE SCHEDULE NO. 125 – Continued DEFINITIONS: (continued) Mixed Use: Buildings served by a residential rate schedule and a rate schedule listed under Applicable shall be eligible for services under this schedule provided the Energy Efficiency Project meets the definition of New Construction or Major Renovation. New Construction: A newly constructed facility or newly constructed square footage added to an existing facility. Major Renovation: A change in facility use type or where the existing system will not meet owner/customer projected requirements within existing square footage. Owner: The person who has both legal and beneficial title to the real property specified in an Energy Efficiency Incentive Agreement who is the mortgagor under a duly recorded mortgage or the grantor under a duly recorded deed of trust or a purchaser under a duly recorded agreement with respect to such real property. Retrofit: Changes, modifications or additions to systems or equipment in existing facility square footage. Supplemental Services Agreement: An agreement between Owner or Customer and Company providing for Company to furnish Supplemental Services with respect to Supplemental Services section of this Tariff Schedule. INCENTIVES FOR ENERGY EFFICIENCY PROJECTS: Energy Efficiency Incentives: Energy Efficiency Incentives made by the Company for installation of EEMs pursuant to an Energy Efficiency Incentive Agreement shall be the lesser of the sum of (a) and (b) OR (c): (a) $0.12/kWh for the Energy Efficiency Project Annual kWh savings as determined using Company provided or approved engineering analysis; (b) $50/kW for Energy Efficiency Project Average Monthly kW savings determined using Company provided or approved engineering analysis. (c) 50% of the Energy Efficiency Project Cost as determined by the Company. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 17 of 29 I.P.U.C. No. 1 Original Sheet No. 125.5 Submitted Under Case No. PAC-E-08-01 ISSUED: February 14, 2008 EFFECTIVE: May 1, 2008 ELECTRIC SERVICE SCHEDULE NO. 125 – Continued INCENTIVES FOR ENERGY EFFICIENCY PROJECTS (continued) Energy Efficiency Projects are eligible for Energy Efficiency Incentives per Table 1 below. Table 1 Program track Design Assistance Standard Standard Standard Project Scope Comprehensive System System System Type New Construction/ Major renovation New Construction/ Major renovation New Construction/ Major renovation Retrofit Energy code applies Yes Yes No No Energy savings threshold Must exceed code by 10% - whole building electric basis Qualifying equipment must exceed code none none Owner/Customer Energy Efficiency Incentive caps applied to the Energy Efficiency Project 50 % of project cost cap No Yes Yes Yes 1 year simple payback cap No Yes Yes Yes Lighting savings cap 75% 50% 50% 50% Design team incentives Honorarium Yes Yes Not available Not available Design Incentive Based on project size Not available Not available Not available (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 18 of 29 I.P.U.C. No. 1 Original Sheet No. 125.6 Submitted Under Case No. PAC-E-08-01 ISSUED: February 14, 2008 EFFECTIVE: May 1, 2008 ELECTRIC SERVICE SCHEDULE NO. 125 – Continued INCENTIVES FOR ENERGY EFFICIENCY PROJECTS: (continued) All proposed Energy Efficiency Measure costs are subject to Company review and approval prior to offering an Energy Efficiency Incentive Agreement. All final Energy Efficiency Measure costs are subject to Company review and approval prior to paying an Energy Efficiency Incentive per the terms of an Energy Efficiency Incentive Agreement. Company review and approval of Energy Efficiency Measure costs may require additional documentation from the Customer or Owner. For the purposes of calculating maximum annual electric savings resulting from lighting, electric savings resulting from lighting interaction with mechanical equipment and from lighting controls will be considered to be lighting savings. The ten percent whole building energy savings threshold shall be calculated as follows: The Energy Efficiency Project must reduce the proposed electric energy consumption by at least 10% when compared to the baseline level of whole building electric energy consumption that would have resulted under the applicable Idaho energy code. The baseline and proposed building design shall be modeled using the methodology defined in Informative Appendix G to ASHRAE 90.1 2004 (or successor revision) using values from the applicable Idaho energy codes. The date of the building permit application shall establish the applicable version of the code. The Customer or Owner may receive only one financial incentive from the Company per EEM. Financial incentives include Energy Efficiency Incentive payments. Design team payments are available per Table 1 and the terms posted on the Idaho energy efficiency program section of the Company web site. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 19 of 29 I.P.U.C. No. 1 Original Sheet No. 125.7 Submitted Under Case No. PAC-E-08-01 ISSUED: February 14, 2008 EFFECTIVE: May 1, 2008 ELECTRIC SERVICE SCHEDULE NO. 125 – Continued PROVISIONS OF SERVICE: (1) Energy Analysis Company shall meet with Customer or Owner and any design team and may perform an initial site visit/plans review to determine what EEMs may be appropriate for an energy analysis. (2) Supplemental Services Company may offer Supplemental Services beyond those described elsewhere in this Tariff Schedule through a Supplemental Services Agreement. Supplemental services shall include, but are not limited to: detailed design, life cycle costs calculations or compliance documentation for green or high performance building standards. Company will negotiate the amount and terms of the supplemental services on a project specific basis and may require any or all of the following: installation of EEMs delivering a certain amount of annual kWh savings, offset of a portion of the available incentive or direct reimbursement of a portion (up to 100%) of the direct Company costs for the service provided. (3) EEM Inspection Company will inspect any EEMs which are funded by or installed under this program. Satisfactory inspection by Company will be required prior to receiving Energy Efficiency Incentives specified in the Energy Efficiency Incentive Agreement. (4) EEM Commissioning Company will require that EEMs as specified in the Energy Efficiency Incentive Agreement be commissioned prior to receiving Energy Efficiency Incentives specified in the Energy Efficiency Incentive Agreement. (4a) Commissioning Opt-Out: Required EEM Commissioning may be omitted with the following adjustments. Annual kWh savings, Average Monthly kW savings and eligible EEM Costs will all be reduced by 20% and an Energy Efficiency Incentive calculated using the provisions specified under Incentives for Energy Efficiency Projects. EEMs where the Owner or Customer has “opted–out” of EEM Commissioning and are later commissioned are not eligible for an additional Energy Efficiency Incentive after the Energy Efficiency Project Incentive is paid. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 20 of 29 I.P.U.C. No. 1 Original Sheet No. 125.7 Submitted Under Case No. PAC-E-08-01 ISSUED: February 14, 2008 EFFECTIVE: May 1, 2008 ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 21 of 29 I.P.U.C. No. 1 Original Sheet No. 125.8 Submitted Under Case No. PAC-E-08-01 ISSUED: February 14, 2008 EFFECTIVE: May 1, 2008 ELECTRIC SERVICE SCHEDULE NO. 125 – Continued PROVISIONS OF SERVICE: (continued) (5) Measure Performance Verification/Evaluation Company may verify or evaluate the energy savings of installed Energy Efficiency Measures specified in the Energy Efficiency Incentive Agreement. This verification may include a telephone survey, site visit, review of plant operation characteristics, and pre- and post-installation of monitoring equipment as necessary to quantify actual energy savings. (6) Minimum Equipment Efficiency For Retrofit Energy Efficiency Projects, EEMs must meet minimum equipment efficiency levels and equipment eligibility requirements in Schedule 115 to be eligible for incentives available under this Schedule. (7) Energy Efficiency Incentives will not be made available to induce fuel switching by Owner. (8) Design team incentives: Company may offer incentives to a design team member with current professional certification including architects and engineers. Incentives are available per Table 1 in this schedule and include honorariums and design incentives. Honorariums are designed to encourage early initial Company consultation on Owner/customer’s design and plans. Honorariums will be equally available to all professionally certified architects and engineers for Idaho projects within Company’s territory and will be limited to one honorarium per project. Design incentives will be offered to all professionally certified architects and engineers for Idaho projects within Company’s territory. Payment of incentives to the design team will require final construction documents include an efficient design meeting company requirements. Incentives will be based on the square footage of the project and limited to one per project. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 22 of 29 I.P.U.C. No. 1 Original Sheet No. 125.9 Submitted Under Case No. PAC-E-08-01 ISSUED: February 14, 2008 EFFECTIVE: May 1, 2008 ELECTRIC SERVICE SCHEDULE NO. 125 – Continued PROVISIONS OF SERVICE: (continued) Additional conditions for design team incentives will be available on the Idaho energy efficiency program section of the Company’s web site and may be changed with 45 days notice posted on the web site. ELECTRIC SERVICE REGULATIONS: Service under this Schedule is subject to the General Rules and Regulations contained in the tariff of which this Schedule is a part, and to those prescribed by regulatory authorities. ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 23 of 29 First Revision of Sheet No. 155.1 I.P.U.C. No. 1 Canceling Original Sheet No. 155.1 Submitted Under Case No. PAC-E-08-01 ISSUED: February 14, 2008 EFFECTIVE: May 1, 2008 ROCKY MOUNTAIN POWER AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 STATE OF IDAHO ______________ Optional for Qualifying Customers ______________ PURPOSE: Service under this Schedule is intended to maximize the efficient utilization of the electricity requirements of new and existing loads in agricultural irrigation systems and irrigation district pumping systems by promoting electric energy-efficient irrigation practices and the installation of Energy Efficiency Measures. APPLICABLE: To service under the Company's Irrigation and Soil Drainage Pumping Power Service Schedule 10, and to any customer who qualifies as a “Farm Load” under the Pacific Northwest Electric Power Planning and Conservation Act, P.L. 96-501 and receives electric service on a retail schedule in all territory served by the Company in the State of Idaho. DEFINITIONS: Annual kWh Savings: The annual kilowatt-hour (kWh) savings resulting from installation of the Energy Efficiency Measures or improved equipment operation, as estimated by the Program Administrator or Company. Average Monthly On Peak kW Savings: The Average Monthly On Peak kilowatt (kW) savings resulting from the installation of Energy Efficiency Measures or improved equipment operation as estimated by Program Administrator or Company using engineering analysis as described below: Average Monthly On Peak kW Savings = (baseline average monthly On Peak kW - proposed average monthly On Peak kW), where; ⇒ Average Monthly On Peak kW = sum of the 12 Monthly Maximum On Peak kW/12, where; (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 24 of 29 I.P.U.C. No. 1 Original Sheet No. 155.2 Submitted Under Advice Letter No. 06-06 ISSUED: August 14, 2006 EFFECTIVE: September 15, 2006 AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 (Continued) DEFINITIONS: (Continued) ⇒ Monthly Maximum On Peak kW = highest of all 15 minute average kW (as determined below) for On Peak hours. On Peak hours are those hours specified in the electric service schedule under which the customer receives electric service. ⇒ 15 minute average kW = sum of kWh used over 0.25 hrs/0.25 hrs Baseline Adjustments: Program Administrator or Company may adjust baseline electric energy consumption and costs during engineering analysis to reflect any of the following: standard practice, changes in capacity, changes in production or system use and equipment at the end of its useful life. Customer: Any party who has applied for, been accepted and receives service at the real property, is the owner of the real property, or is the electricity user at the real property. Energy Efficiency Incentive: Payment of money made by Program Administrator or Company to Customer for installation of Energy Efficiency Measures pursuant to an executed Energy Efficiency Incentive Agreement or approved Application. Energy Efficiency Incentive Agreement: An agreement between Customer and Program Administrator or Company providing for Program Administrator or Company to furnish Energy Efficiency Incentive with respect to Energy Efficiency Measures pursuant to this tariff Schedule. Energy Efficiency Incentive Application: An application provided by the Program Administrator or Company, completed by the Customer and approved by the Program Administrator or Company requesting the Program Administrator or Company furnish Energy Efficiency Incentives with respect to Energy Efficiency Measures pursuant to this Schedule. Energy Efficiency Measure (EEM): Permanently installed measure specified in an Energy Efficiency Incentive Agreement or Application which can improve the efficiency of the Customer's electric energy use. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 25 of 29 I.P.U.C. No. 1 Original Sheet No. 155.3 Submitted Under Advice Letter No. 06-06 ISSUED: August 14, 2006 EFFECTIVE: September 15, 2006 AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 (Continued) DEFINITIONS: (Continued) Energy Efficiency Project: One or more EEM(s) covered by one Energy Efficiency Incentive Agreement or Application . Energy Efficiency Measure (EEM) Cost: New Construction: EEM Cost is the total installed cost of the energy efficient equipment or system minus the cost of the required/common practice equipment or system. Major System Upgrades: EEM Cost is the total installed cost of the energy efficient equipment or system minus the cost of the required/common practice equipment or system. Retrofit: EEM Cost is the total installed cost of the energy efficient equipment or modification. In the case of New Construction, Major System Upgrades and Retrofits, EEM Costs shall mean the Customer’s reasonable costs incurred (net of any discounts, rebates or incentives other than Energy Efficiency Incentives available under this Schedule or United States Department of Agriculture (USDA) Environmental Quality Incentives Program (EQIP) incentives, or other consideration that reduces the final actual EEM Cost incurred by the Customer) to purchase and install EEMs at the Customer’s facility. If the Customer installs the EEM, then the cost of installation shall be equal to the Customer’s reasonable and realistic actual labor costs for such installation. New Construction: New irrigation piping, pumping, or system to provide irrigation for existing irrigated acreage or loads. Major System Upgrades: Changes, modifications or additions to existing irrigation systems or equipment that involve substantial removal and replacement with new systems or equipment where such changes, modifications or additions are required to replace equipment at the end of its useful life, add capacity or change the utilization of the acreage or loads. Program Administrator: Qualified person or entity hired by the Company to administer this Schedule. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 26 of 29 First Revision of Sheet No. 155.4 I.P.U.C. No. 1 Canceling Original Sheet No. 155.4 Submitted Under Case No. PAC-E-13-10 ISSUED: May 24, 2013 EFFECTIVE: August 15, 2013 AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 (Continued) DEFINITIONS: (Continued) Retrofit: Changes, modifications or additions to systems or equipment serving existing acreage or loads. INCENTIVES FOR EEMS: Energy Efficiency Incentives: Program Administrator or Company shall establish procedures and requirements for providing Energy Efficiency Incentives to Customers which shall be posted on the Company web site. Energy Efficiency Incentives include amounts available according to the energy, demand and cost formula listed below. All proposed Energy Efficiency Projects are subject to Program Administrator or Company approval prior to offering an Energy Efficiency Incentive Agreement or Application. Program Administrator or Company will establish Energy Efficiency Project approval criteria and post the criteria on the Company web site. Energy Efficiency Incentives made available for installation of EEMs pursuant to an Energy Efficiency Incentive Agreement or Application shall be the lesser of the sum of (a) and (b) OR (c): (a) $0.12 /kWh for the Annual kWh savings as determined using Program Administrator or Company provided or approved engineering analysis; (b) $50/kW for Average Monthly On Peak kW savings determined using Program Administrator or Company provided or approved engineering analysis. (c) 50% of the EEM Cost as determined by the Program Administrator or Company. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 27 of 29 I.P.U.C. No. 1 Original Sheet No. 155.5 Submitted Under Advice Letter No. 06-06 ISSUED: August 14, 2006 EFFECTIVE: September 15, 2006 AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 (Continued) INCENTIVES FOR EEMS: (Continued) Energy Efficiency Incentives may be adjusted such that Customer does not receive more than 100% of EEM Costs in total incentives including incentives available under this Schedule and EQIP incentives. All proposed EEM Costs are subject to Program Administrator or Company review and approval prior to offering an Energy Efficiency Incentive Agreement or approving an Application. All final EEM Costs are subject to Program Administrator or Company review and approval prior to paying an Energy Efficiency Incentive per the terms of an Energy Efficiency Incentive Agreement or approved Application. Program Administrator or Company review and approval of EEM Costs may require additional documentation from the Customer. The Customer may receive only one Energy Efficiency Incentive under this Schedule per EEM. PROVISIONS OF SERVICE: (1) Energy Analysis Program Administrator or Company shall meet with Customer and any design team and may perform an initial site visit/plans review to determine what EEMs may be appropriate for an energy analysis. The energy analysis may include a visual pump check, water management consultation, pump testing, and/or irrigation/pump system analysis. At the conclusion of the visual pump check and water management consultation, the Customer may be asked to sign an approval to proceed to the next step in the program and to commit to implement operational improvements identified in the water management consultation. If Customer signs the approval, Customer will receive an irrigation/pump system analysis, an incentive offer if potential upgrades are identified, and post-installation testing of installed system. (Continued) ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 28 of 29 First Revision of Sheet No. 155.6 I.P.U.C. No. 1 Canceling Original Sheet No. 155.6 Submitted Under Case No. PAC-E-13-10 ISSUED: May 24, 2013 EFFECTIVE: August 15, 2013 AGRICULTURAL ENERGY SERVICES SCHEDULE NO. 155 (Continued) PROVISIONS OF SERVICE: (Continued) (2) EEM Inspection Program Administrator or Company may inspect any EEMs which are funded by or installed under this program. Satisfactory inspection by Program Administrator or Company will be required prior to receiving Energy Efficiency Incentives specified in the Energy Efficiency Incentive Agreement or approved Application. (3) Measure Performance Verification/Evaluation Program Administrator and/or Company may verify or evaluate the energy savings of installed Energy Efficiency Measures specified in the Energy Efficiency Incentive Agreement or approved Application. This verification may include a telephone survey, site visit, review of system operating characteristics, and pre- and post-installation of monitoring equipment as necessary to quantify actual energy savings. (4) Energy Efficiency Incentives will not be made available to induce fuel switching by Customer. ELECTRIC SERVICE REGULATIONS: Service under this Schedule is subject to the General Rules and Regulations contained in the tariff of which this Schedule is a part, and to those prescribed by regulatory authorities. ID PAC-E-14-07 IPUC 14 Attachment IPUC 14-1 29 of 29