Intermountain Gas 260528 Kuna Construction

IPUC Construction Inspection
Inspector(s): Gatti Date(s): 260528
Company/Owner: Intermountain Gas Company (IGC) Unit/OPID: 8160
Address: 8622 S Copperdale Ave City/District: Kuna
Contractor/Job #: IGC Foreman: IGC Operator Supervisor: None
W012397194 Von Tuchlinski
Job Description: 3/4" Service Lines System Type: ❑X GD ❑ GT ❑ GG
One-Call Ticket: 2026194146 Total Inspection Days: 1.0
Tasks: Procedure Rating Comments
1. Materials—Handling, Storage, OPS 11 SAT
Labeling
2. Trenching/Boring—Depth, Clearance OPS 308 SAT
OPS 322
3. Bedding/Backfill OPS 308 SAT
SF 418
4. Pipe Installation(Tracer Wire) OPS 308 SAT
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 402
OPS 403
7. Manuals—Field Procedures, O & M SAT IGC procedures followed
8. Testing—Pressure, Duration, Type OPS 505 SAT
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 SAT
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 SAT
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 SAT
18. Safety Equipment SF 418 SAT
SF 422
19. Abandonment OPS 607 N/A
IPUC Form 4 Rev.12/08/2025

IPUC Construction Inspection
20. Line Locating OPS 611 SAT
21. Plastic Pine OPS 307 SAT
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 325
- Squeezing OPS 800
- Heat Plate
- Joining Procedure
22. Steel Pine OPS 200 N/A
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
- Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations included: (8622 S Copperdale Ave, Kuna, ID): Safety equipment, JSA, valid dig ticket,
material verification, verified operator qualifications, verified equipment calibration, correct trench depth,
successful pressure test of 96 psi for 15 minutes, mechanical fittings (coupler), squeeze off, 1200 EFV,
tracer wire, bedding/backfill with sand, purge from riser and continuity test. Quizzed employees on
applicable ADCs of mechanical fittings and temperature of pipe during pressure test. All observed
procedures were followed in accordance with IGC procedures.
Corrective Action Required: ❑ Yes ® No Compliance Letter#: N/A
Lead Inspector: Galli Date: Reviewer: Brooks Date:
260528 y
Signature: Signature:
IPUC Form 4 Rev. 12/08/2025