Intermountain Gas 260415 Boise Construction Construction

IPUC Construction Inspection
Inspector(s): Galli, Green Date(s): 260415
Company/Owner: Intermountain Gas Company (IGC) Unit/OPID: 8160
Address: 9577 W Irving St City/District: Boise
Contractor/Job #: Dasco- Foreman: Operator Supervisor: None
W012526878 J. Garcilazo
Job Description: 3/4" Service Lines System Type: 0 GD ❑ GT ❑ GG
One-Call Ticket: 2026151408 Total Inspection Days: 2.0
Tasks: Procedure Rating Comments
1. Materials—Handling, Storage, OPS 11 SAT 3/4" inch dated 8/2025
Labeling
2. Trenching/Boring—Depth, Clearance OPS 308 SAT At least 24" deep
OPS 322
3. Bedding/Backfill OPS 308 SAT Native soil
SF 418
4. Pipe Installation(Tracer Wire) OPS 308 SAT 14 gauge in open trench
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 402
OPS 403
7. Manuals—Field Procedures, O & M SAT IGC procedures followed
8. Testing—Pressure, Duration, Type OPS 505 SAT 100 PSI for 15 Min
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 SAT 3 feet away from electric
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 SAT EFV 1200 preinstalled per locusview
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 SAT Purge from meter with CGI
18. Safety Equipment SF 418 SAT Fire extinguisher and JSA
SF 422
19. Abandonment OPS 607 N/A
IPUC Form 4 Rev. 12/08/2025

IPUC Construction Inspection
20. Line Locating OPS 611 SAT
21. Plastic Pipe OPS 307 SAT Observed 3/4"butt fusions
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 325
- Squeezing OPS 800
- Heat Plate
- Joining Procedure
22. Steel Pipe OPS 200 N/A
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations included: (9577 W Irving St, Boise, ID): Safety equipment, JSA, valid dig ticket, verified
operator qualifications, verified equipment calibration, correct trench depth, successful pressure test of 100
psi for 15 minutes, verified proper rollback of V butt fusion, tracer wire, bedding/backfill with native soil,
purge from riser and continuity test. All observed procedures were followed in accordance with IGC
procedures.
Corrective Action Required: ❑ Yes ® No Compliance Letter#: N/A
Lead Inspector: Galli Date: Reviewer: Brooks Date:
260415 a6 oy[5
Signature: Signature:
IPUC Form 4 Rev.12/08/2025