Intermountain Gas 260415 Eagle Construction Construction

IPUC Construction Inspection
Inspector(s): Perkins Date(s): 260415
Company/Owner: Intermountain Gas Company (IGC) Unit/OPID: 8160
Address: 2149 E Hidden Cove Ln City/District: Eagle
Contractor/Job #: Dasco- Foreman: Operator Supervisor: None
W012548245 J. Rodriguez
Job Description: 2" Service Line System Type: © GD ❑ GT ❑ GG
One-Call Ticket: 2026151545 Total Inspection Days: 1.0
Tasks: Procedure Rating Comments
1. Materials—Handling, Storage, 1 OPS 11 SAT 2"inch dated 8/2024
Labeling
2. Trenching/Boring—Depth, Clearance OPS 308 SAT At least 24" deep
OPS 322
3. Bedding/Backfill OPS 308 SAT Sand/Native soil
SF 418
4. Pipe Installation(Tracer Wire) OPS 308 SAT 14 gauge in open trench
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 402
OPS 403 _
7. Manuals—Field Procedures, O & M SAT IGC procedures followed
8. Testing—Pressure, Duration, Type OPS 505 N/A
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation i OPS 325 N/A
11. Service Line Installation OPS 302 SAT
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 SAT 3 feet away from electric
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 EFV 5500
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 N/A
18. Safety Equipment SF 418 SAT Fire extinguisher and JSA
SF 422 _
19. Abandonment OPS 607 N/A
IPUC Form 4 Rev. 12/08/2025

IPUC Construction Inspection
20. Line Locating OPS 611 SAT
21. Plastic Pipe OPS 307 SAT Observed 2"butt fusions and electro-
- Joiner(s) Qualified OPS 309 fusion
- Fusion Tools OPS 325
- Squeezing OPS 800
- Heat Plate
- Joining Procedure
22. Steel Pipe OPS 200 N/A
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
- Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations included: (2149 E Hidden Cove Ln, Eagle, ID): Safety equipment, JSA, valid dig ticket,
verified operator qualifications, verified equipment calibration, correct trench depth, verified proper
rollback of 2"butt fusions, 2" electro-fusion tapping tee, tracer wire, bedding/backfill with sand/native
soil. All observed procedures were followed in accordance with IGC procedures.
Corrective Action Required: ❑ Yes ® No Compliance Letter#: N/A
Lead Inspector: Perkins Date: Reviewer: Brooks Date:
,� 260415
Signature: � � Signature: ahoy 15
IPUC Form 4 Rev.12/08/2025