Intermountain Gas 260420 Ucon Construction Construction

IPUC Constriction Inspection
Inspector(s): Perkins Date(s): 260420
Company/Owner: Intermountain Gas Company(IGC) Unit/OPID: 8160
Address: 9347 N 25"E City/District: Ucon
Contractor/Job#: KV-Utilities Foreman: Operator Supervisor: None
W012471833 M.Doig
Job Description: 3/4" Service Line/HPSS removal System Type: ® GD ❑ GT ❑ GG
One-Call Ticket: 2026142184 Total Inspection Days: 1.0
Tasks: Procedure Rating Comments
1. Materials—Handling, Storage, OPS 11 SAT
Labeling
2. Trenching/Boring—Depth, Clearance OPS 308 SAT
OPS 322
3. Bedding/Backfill OPS 308 N/A
SF 418
4. Pipe Installation(Tracer Wire) OPS 308 SAT Pull back after bore
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 402
OPS 403
7. Manuals—Field Procedures, O&M SAT IGC procedures followed
8. Testing—Pressure,Duration,Type OPS 505 N/A
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT Only witnessed pull back on bore
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 N/A
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 SAT 1200
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 N/A
18. Safety Equipment SF 418 SAT
SF 422
19. Abandonment OPS 607 N/A
IPUC Form 4 Rev.12/08/2025

IPUC Construction Inspection
20. Line Locating OPS 611 SAT Pot holing
21. Plastic Pipe OPS 307 SAT Fusing
-Joiner(s)Qualified OPS 309
-Fusion Tools OPS 325
- Squeezing OPS 800
-Heat Plate
-Joining Procedure
22. Steel Pipe OPS 200 N/A
-Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
-Welding Procedures OPS 407
-Removal of asbestos wrap OPS 402
-Exothermic Welding OPS 403
Additional Comments:
Observations included: (9347 N 25`h E,Ucon, ID): Safety equipment,valid dig ticket,verified operator
qualifications,verified equipment calibration, correct trench depth, verified proper rollback of/a"butt
fusion, 1200 EFV,tracer wire, boring and pullback of service line, and potholing. All observed procedures
were followed in accordance with IGC procedures.
Corrective Action Required: ❑ Yes ® No Compliance Letter#: N/A
Lead Inspector: erkins Date: Reviewer: Brooks Date:
260420 i6 p 5 I
Signature:. Signature:
IPUC Form 4 Ray.12/08/2025