Intermountain Gas 260319 Eagle Construction Construction

IPUC Construction Inspection
Inspector(s): Galli Date(s): 260319
Company/Owner: Intermountain Gas Company (IGC) Unit/OPID: 8160
Address: 7919 Hawks Beard Lane City/District: Eagle
Contractor/Job#: Foreman: Operator Supervisor: None
DASCO -W012503548 J. Garcilazo
Job Description: 2" Service Line System Type: ❑X GD ❑ GT ❑ GG
One-Call Ticket: 2026113936 Total Inspection Days: 0.5
Tasks: Procedure Rating Comments
1. Materials—Handling, Storage, OPS 11 SAT 2" inch dated 8/2024
Labeling
2. Trenching/Boring—Depth, Clearance OPS 308 SAT At least 30" deep
OPS 322
3. Bedding/Backfill OPS 308 N/A
SF 418
4. Pipe Installation(Tracer Wire) OPS 308 SAT 14 gauge in open trench
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 402
OPS 403
7. Manuals—Field Procedures, O & M SAT IGC procedures followed
8. Testing—Pressure, Duration, Type OPS 505 N/A
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 SAT 3 feet away from electrical
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 N/A
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 N/A
18. Safety Equipment SF 418 SAT Fire extinguisher and JSA
SF 422
19. Abandonment OPS 607 N/A
IPUC Form 4 Rev. 12/08/2025

IPUC Construction Inspection
20. Line Locating OPS 611 SAT Hand dig to expose service stub
21. Plastic Pipe OPS 307 SAT Observed 2"butt fission
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 325
- Squeezing OPS 800
- Heat Plate
- Joining Procedure
22. Steel Pipe OPS 200 N/A
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
-Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations included(7919 Hawks Beard Lane, Eagle, ID): Safety equipment, JSA, valid dig ticket,
verified operator qualifications, verified equipment calibration, line locating, correct trench depth,
observed butt fusion process and verified proper rollback of completed 2"butt fusions. All observed
procedures were followed in accordance with IGC procedures.
Corrective Action Required: ❑ Yes ® No Compliance Letter#: N/A
Lead Inspector: Galli Date: Reviewer: Brooks Date:
260319 '
Signature: Signature: a604ly
IPUC Form 4 Rev. 12/08/2025