Intermountain Gas 260318-19 Meridian Construction Construction

IPUC Construction Inspection
Inspector(s): Perkins Date(s): 260318-19
Company/Owner: Intermountain Gas Company (IGC) Unit/OPID: 8160
Address: 425 E Watertower St City/District: Meridian
Contractor/Job#: Das-Co Foreman: Operator Supervisor:
W012474469 A. Rodriguez
Job Description: 2" Service Line System Type: © GD ❑ GT ❑ GG
One-Call Ticket: 2026082940 Total Inspection Days: 2.0
Tasks: Procedure Rating Comments
1. Materials—Handling, Storage, OPS 11 SAT 2" inch dated 4/2025
Labeling
2. Trenching/Boring—Depth, Clearance OPS 308 SAT At least 30" deep, potholing
OPS 322
3. Bedding/Backfill OPS 308 SAT Bedding with sand
SF 418
4. Pipe Installation (Tracer Wire) OPS 308 SAT 14 gauge in open trench
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 402
OPS 403
7. Manuals—Field Procedures, O & M SAT IGC procedures followed
8. Testing—Pressure, Duration, Type OPS 505 N/A
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT Did not hook too main
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 N/A
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 N/A
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 N/A
18. Safety Equipment SF 418 SAT Fire extinguisher and JSA
SF 422
19. Abandonment OPS 607 N/A
IPUC Form 4 Rev.12/08/2025

IPUC Construction Inspection
20. Line Locating OPS 611 SAT Hand dig to locate 4"main
21. Plastic Pipe OPS 307 SAT Observed 2"butt fusion
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 325
- Squeezing OPS 800
- Heat Plate
- Joining Procedure
22. Steel Pine OPS 200 N/A
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
- Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations included (425 E Watertower St, Meridian): Safety equipment, JSA, valid dig ticket, verified
operator qualifications, verified equipment calibration, correct trench depth, potholing, line locating,
observed butt fusion process, tracer wire, bedding with sand and backfill. All observed procedures
completed by field personnel were followed in accordance with IGC Operations and Maintenance Manual.
Corrective Action Required: ❑ Yes ® No Compliance Letter#: N/A
Lead Inspector: P rkins Date: Reviewer: Brooks Date:
260319
Signature: Signature: a60'liy
jV
IPUC Form 4 Rev. 12/08/2025