Intermountain Gas 260106 Eagle Construction

IPUC Construction Inspection
Inspector(s): Perkins Date(s): 260106
Company/Owner: Intermountain Gas Company (IGC) Unit/OPID: 08160
Address: 2379 N Annadale PI City/District: Eagle
Contractor/Job#: W012388608 Foreman: Operator Supervisor: None
J. Gonzalez
Job Description: %" Service Line System Type: ® GD ❑ GT ❑ GG
One-Call Ticket: 2025512748 Total Inspection Days: 1.0
Tasks: Procedure# Rating Comments
1. Materials—Handling, Storage, Labeling OPS 11 SAT %"
2. Trenching/Boring—Depth, Clearance OPS 308 SAT At least 24" deep
OPS 322
3. Bedding/Backfill OPS 308 SAT Bedding with Sand
SF 418
4. Pipe Installation(Tracer Wire) OPS 308 SAT 14-gauge in open trench
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 402
OPS 403
7. Manuals—Field Procedures, O & M SAT
8. Testing—Pressure, Duration, Type OPS 505 SAT 96 psi for 15 minutes
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 SAT
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 SAT EFV 1200
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 SAT Cleaning purge
18. Safety Equipment SF 418 SAT Fire Extinguisher and JSA
SF 422
19. Abandonment OPS 607 N/A
IPUC Form 4 Rev.12/08/2025

IPUC Construction Inspection
20. Line Locating OPS 611 N/A Valid dig ticket. Hand dig.
21. Plastic Pine OPS 307 SAT Butt fusion observed
-Joiner(s) Qualified OPS 309 Squeeze off
- Fusion Tools OPS 325
- Squeezing OPS 800
_ - Heat Plate
- Joining Procedure
22. Steel Pipe OPS 200 N/A
-Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
- Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations included (2379 N Annadale PI, Eagle, ID): Safety equipment, JSA, valid dig ticket, verified
operator qualifications, verified equipment calibration, correct trench depth, verified proper rollback of
completed 3/4"butt fusions, EFV 1200,bedding with sand, successful pressure test, squeeze off, cleaning
purge, backfill and continuity testing. All observed procedures were followed in accordance with IGC
Operations and Maintenance Manual.
Corrective Action Required: ❑ Yes ® No Compliance Letter#: NA
Lead Inspector: Perkins Date: Reviewer: B ooks Date:
250106
Signature: Signature: 0 a10
IPUC Form 4 Rm 12/08/2025