Intermountain Gas 260106 Emmett Construction

IPUC Construction Inspection
Inspector(s): Galli, Green Date(s): 260106
Company/Owner: Intermountain Gas Company(IGC) Unit/OPID: 8160
Address: 901 Whitewater Way City/District: Emmett
Contractor/Job #: W012405063 Foreman: Operator Supervisor: None
J. Garcilazo
Job Description: %" Service Line System Type: © GD ❑ GT ❑ GG
One-Call Ticket: 2025531476 Total Inspection Days: 2.0
Tasks: Procedure# Rating Comments
1. Materials—Handling, Storage, Labeling OPS 11 SAT 3/" inch dated 11/2025
2. Trenching/Boring—Depth, Clearance OPS 308 SAT At least 24" deep
OPS 322
3. Bedding/Backfill OPS 308 SAT Bedding with sand
SF 418
4. Pipe Installation(Tracer Wire) OPS 308 SAT 14 gauge in open trench
OPS 322 12 gauge bored under driveway
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 402
OPS 403
7. Manuals—Field Procedures, O & M SAT All observed procedures followed
8. Testing—Pressure, Duration, Type OPS 505 SAT 100 psi for 15 min
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 SAT 3 feet away from electrical
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 SAT EFV 1200
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 N/A
18. Safety Equipment SF 418 SAT Fire extinguisher and JSA
SF 422
19. Abandonment OPS 607 N/A
IPUC Form 4 Rev. 12/08/2025

IPUC Construction Inspection
20. Line Locating OPS 611 SAT Hand dig service stub
21. Plastic Pipe OPS 307 SAT Butt fusion observed
- Joiner(s) Qualified OPS 309 Squeeze off
- Fusion Tools OPS 325
- Squeezing OPS 800
- Heat Plate
- Joining Procedure
22. Steel Pipe OPS 200 N/A
-Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations included (901 Whitewater Way, Emmett, ID): Safety equipment, JSA, valid dig ticket,
verified operator qualifications, verified equipment calibration, correct trench depth, verified proper
rollback of completed 3/4"butt fusions, observed butt fusion process, EFV 1200, bedding with sand and
successful pressure test. All observed procedures were followed in accordance with IGC Operations and
Maintenance Manual.
Corrective Action Required: ❑ Yes ® No Compliance Letter#: NA
Lead Inspector: Galli Date: Reviewer: Brooks Date:
260106
Signature: Signature: 1601 X0
IPUC FOrm 4 Rev. 12/08/2025