Intermountain Gas 251016 Eagle Construction

IPUC Construction Inspection
Inspector(s): Galli,Brooks Date(s): 251016
Company/Owner: Intermountain Gas Company (IGC) Unit/OPID: 08160
Address: 1797 and 1809 N Big Star Ave City/District: Eagle
Contractor/Job#: W012360321 and Foreman: Operator Supervisor: None
W012358270 Jesse
Ommundson
Job Description: %" Service Line System Type: © GD ❑ GT ❑ GG
One-Call Ticket: 2025392959 and 2025392060 Total Inspection Days: 2.0
Tasks: Procedure# Rating Comments
1. Materials—Handling, Storage, Labeling OPS 11 SAT 3/" inch dated 08/2025
2. Trenching/Boring—Depth, Clearance OPS 308 SAT 24 inches
OPS 322
3. Bedding/Backfill OPS 308 N/A
SF 418
4. Pipe Installation (Tracer Wire) OPS 308 N/A
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 403
7. Manuals—Field Procedures, O & M SAT
8. Testing—Pressure, Duration, Type OPS 505 N/A
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 SAT 3 feet away from electrical
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 N/A
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 N/A
18. Safety Equipment SF 418 SAT Fire Extinguisher and JSA
SF 422
19. Abandonment OPS 607 N/A
20. Line Locating OPS 611 SAT Hand dig to locate stub
IPUC Form 4 Rev. 12/10/2024

IPUC Construction Inspection
21. Plastic Pine OPS 307 N/A
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 325
- Squeezing OPS 800
- Heat Plate
- Joining Procedure
22. Steel Pine OPS 200 N/A
-Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations included (1797 and 1809 N Big Star Ave, Eagle, ID): Safety equipment, JSA, valid dig
ticket, verified operator qualifications, verified equipment calibration,hand dig to locate stub and correct
trench depth. All observed procedures were followed in accordance with IGC Operations and Maintenance
Manual.
Corrective Action Required: ❑ Yes ® No Compliance Letter#: NA
Lead Inspector: Gath Date: Reviewer: Brooks Date:
251016
Signature: / Signature: ` 10 a-tS
IPUC Form 4 Rev. 12/10/2024