Intermountain Gas 250923 Nampa Construction

IPUC Construction Inspection
Inspector(s): Galli, Green Date(s): 250923
Company/Owner: Intermountain Gas Company(IGC) Unit/OPID: 08160
Address: 3751 E Jamestown Dr City/District: Nampa
Contractor/Job#: W012318576 Foreman: Nathan Operator Supervisor: None
Von Tuchlinski
Job Description: %" Service Line System Type: ® GD ❑ GT ❑ GG
One-Call Ticket: 2025342943 Total Inspection Days: 2.0
Tasks: Procedure# Rating Comments
1. Materials—Handling, Storage, Labeling OPS 11 SAT %" inch dated 08/2025
2. Trenching/Boring—Depth, Clearance OPS 308 SAT 24 inches
OPS 322
3. Bedding/Backfill OPS 308 SAT Sand used
SF 418
4. Pipe Installation(Tracer Wire) OPS 308 SAT 14 gauge observed in trench
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 403
7. Manuals—Field Procedures, O & M SAT
8. Testing—Pressure, Duration, Type OPS 505 SAT 94 psi for 15 minutes
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 SAT 3 feet away from electrical
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 SAT EFV 1200
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 N/A
18. Safety Equipment SF 418 SAT Fire Extinguisher and JSA
SF 422
19. Abandonment OPS 607 N/A
20. Line Locating OPS 611 SAT Hand dig to locate stub
IPUC Form 4 Rev. 12/10/2024

IPUC Construction Inspection
21. Plastic Pipe OPS 307 SAT Observed %" PE met-fit
- Joiner(s) Qualified OPS 309 Observed squeeze off
- Fusion Tools OPS 325
- Squeezing OPS 800
-Heat Plate
- Joining Procedure
22. Steel Pipe OPS 200 N/A
-Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
-Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations included(3751 E Jamestown Drive, Nampa, ID): Safety equipment, JSA, verified operator
qualifications, verified equipment calibration, correct trench depth, verified proper 3/"met-fit installation,
tracer wire installation, successful pressure test, squeeze off,bedding,backfill and continuity testing.
Quizzed employees of AOC recognition of squeeze off. Counseled IGC employees on Idaho Dig Laws.
All observed procedures were followed in accordance with IGC Operations and Maintenance Manual.
Corrective Action Required: ❑ Yes ® No Compliance Letter#: NA
Lead Inspector: Galli Date: Reviewer: Brooks Date:
250923
Signature: Signature:
IPUC Form 4 Rev. 12/10/2024