Intermountain Gas 250410 Boise Construction

IPUC Construction Inspection
Inspector(s): Galli Date(s): 250410
Company/Owner: Intermountain Gas Company (IGC) Unit/OPID: 08160
Address: 13951 N Malheur Ave City/District: Boise
Contractor/Job #: W012080248 Foreman: Operator Supervisor: None
Jose Rodriguez
Job Description: 3/" Service Line(s) System Type: ❑X GD ❑ GT ❑ GG
One-Call Ticket: 2025151120 Total Inspection Days: 1.0
Tasks: Procedure# Rating Comments
1. Materials—Handling, Storage, Labeling OPS 11 SAT 3/" PE dated 10/2022
2. Trenching/Boring—Depth, Clearance OPS 308 SAT 24 inches
OPS 322
3. Bedding/Backfill OPS 308 SAT Sand not needed
SF 418
4. Pipe Installation(Tracer Wire) OPS 308 SAT 14-gauge used for open trench
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 403
7. Manuals—Field Procedures, O & M SAT
8. Testing—Pressure, Duration, Type OPS 505 SAT 96 PSI for 15 min
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 SAT 3-foot meter separation
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 SAT EFV 1200
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 SAT Cleaning Purge
18. Safety Equipment SF 418 SAT Fire Extinguisher
SF 422
19. Abandonment OPS 607 N/A
20. Line Locating OPS 611 SAT Hand dig to locate stub
IPUC Form 4 Rev.12/10/2024

IPUC Construction Inspection
21. Plastic Pipe OPS 307 SAT Butt fusion of 3/4" PE
- Joiner(s) Qualified OPS 309 Mechanical fittings (couplers)
- Fusion Tools OPS 325
- Squeezing OPS 800
- Heat Plate
- Joining Procedure
22. Steel Pipe OPS 200 N/A
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
-Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations Included: (13 95 1 N Malheur Ave, Boise, ID) Line locating, correct trench depth, safety
equipment, verification OQ records, verification equipment calibrations, butt fusions, mechanical fittings
(couplers), tracer wire, pressure test, cleaning purge, squeeze off, bedding and backfill. All observed
procedures were completed in accordance with IGC Operations and Maintenance Manual.
Corrective Action Required: ❑ Yes ® No Compliance Letter#:
Lead Inspector: Galli Date: Reviewer: Brooks Date:
�j� 250410
Signature: ( Signature3_5: °y 3''�
IPUC Form 4 Rev. 12/10/2024