Intermountain Gas 250306 Kuna Construction

IPUC Construction Inspection
Inspector(s): Galli Date(s): 250306
Company/Owner: Intermountain Gas Company(IGC) Unit/OPID: 08160
Address: 2180 S Padstow St City/District: Kuna
Contractor/Job #: W012006278 Foreman: Operator Supervisor: None
Jose Mendoza
Job Description: %" Service Line(s) System Type: ® GD ❑ GT ❑ GG
One-Call Ticket: 2025086264 Total Inspection Days: 1.0
Tasks: Procedure# Rating Comments
1. Materials—Handling, Storage, Labeling OPS 11 SAT
2. Trenching/Boring—Depth, Clearance OPS 308 SAT 24 inches
OPS 322
3. Bedding/Backfill OPS 308 SAT Sand used
SF 418
4. Pipe Installation(Tracer Wire) OPS 308 SAT 14-gauge
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 403
7. Manuals—Field Procedures, O &M SAT
8. Testing—Pressure, Duration, Type OPS 505 SAT 98 PSI for 15 minutes
9. OQ Qualifications OPS 800 SAT Verified
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 SAT
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 SAT EFV 1200
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 SAT Cleaning purge
18. Safety Equipment SF 418 SAT Fire Extinguisher
SF 422
19. Abandonment OPS 607 N/A
20. Line Locating OPS 611 N/A Did not observe
IPUC Form 4 Rev.12/10/2024

IPUC Construction Inspection
21. Plastic Pipe OPS 307 SAT Butt Fusion
- Joiner(s) Qualified OPS 309 Stab fittings
- Fusion Tools OPS 325 Squeeze off
- Squeezing OPS 800
- Heat Plate
- Joining Procedure
22. Steel Pipe OPS 200 N/A
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations Included: (2180 E Padstow St, Kuna, ID) Correct trench depth, safety equipment, verification
OQ records, verification equipment calibrations, mechanical fittings (coupler) installation, butt fusion,
tracer wire,pressure test, squeeze off, cleaning purge, bedding, backfill and continuity test. All observed
procedures were completed in accordance with IGC Operations and Maintenance Manual.
Corrective Action Required: ❑ Yes ® No Compliance Letter#:
Lead Inspector: Galli Date: Reviewer: Brooks Date:
250306
Signature: � Signature: 0-503�.5
IPUC Form 4 Rev.12/10/2024