Intermountain Gas 250123 Weiser Construction

IPUC Construction Inspection
Inspector(s): Galli/Brooks Date(s): 250123
Company/Owner: Intermountain Gas Company(IGC) Unit/OPID: 08160
Address: 1690 W 711 City/District: Weiser
Contractor/Job#: 002797-263 Foreman: Operator Supervisor: Monty
Jose Rodriquez
Job Description: %" Service Line(s) from 4" Main System Type: ® GD ❑ GT ❑ GG
One-Call Ticket: 2025031686 Total Inspection Days: 2
Tasks: Procedure# Rating Comments
1. Materials—Handling, Storage, Labeling OPS 11 SAT
2. Trenching/Boring—Depth, Clearance OPS 308 SAT 24 inches
OPS 322
3. Bedding/Backfill OPS 308 N/A
SF 418
4. Pipe Installation(Tracer Wire) OPS 308 SAT 12 gauge bore wire
OPS 322
5. Valve Installation OPS 703 N/A
6. Coating Condition OPS 401 N/A
OPS 403
7. Manuals—Field Procedures, O & M SAT
8. Testing—Pressure, Duration, Type OPS 505 N/A
9. OQ Qualifications OPS 800 SAT
10. Casing Seal/Installation OPS 325 N/A
11. Service Line Installation OPS 302 SAT
12. Tie-In/Hot Tapping OPS 600 N/A
13. Meter Location/Regulator Testing OPS 302 SAT
14. Equipment Calibration Verification OPS 501 SAT Verified
15. EFV Installation OPS 301 N/A
16. MAOP OPS 602 N/A
OPS 606
OPS 900
OPS 1000
17. Purge OPS 603 N/A
18. Safety Equipment SF 418 SAT Fire extinguisher and JSA
SF 422
19. Abandonment OPS 607 N/A
20. Line Locating OPS 611 SAT Hand dig to daylight 4" main
IPUC Form 4 Rev. 12/10/2024

IPUC Construction Inspection
21. Plastic Pipe OPS 307 SAT
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 325
- Squeezing OPS 800
- Heat Plate
- Joining Procedure
22. Steel Pipe OPS 200 SAT
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
Additional Comments:
Observations Included: (1690 W 71h Street, Weiser, ID) Line locating, hand dig to daylight service stub,
correct trench depth, safety equipment, verification OQ records, verification equipment calibrations,
inspected completed butt fusions, boring and pull back and tracer wire install. All observed procedures were
conducted in accordance with IGC Operations and Maintenance Manual.
Corrective Action Required: ❑ Yes ® No Compliance Letter#:
Lead Inspector: GaIH Date: Reviewer: Brooks Date
250123
Signature: Signature: �S C zo q
IPUC Form 4 Rev. 12/10/2024