Intermountain Gas 241028 Meridian Construction

IPUC Construction Inspection
Inspector(s): Galli Date(s): 10/28/2024
Company/Owner: Unit/OPID: 08160
Intermountain Gas Company (IGC)
Address: Inspirado Subdivision (near Chinden City/District: Meridian
Star Road intersection
Contractor/Job #: Foreman: Employees: Jesse Jaramillo
367-0528 Juan Carlos Pozos
Job Description: 2" Main Line with V Service System Type: ® Distribution ❑ Transmission
Stubs(s)
Operator Supervisor: One-Call Ticket: N/A
On-Site: N
Total Inspection Days: 1.0
Tasks: I Rating Critical Procedure# Comments
1. Materials—Handling, Storage, SAT OPS 11
Labeling
2. Trenching/Boring—Depth, Clearance SAT OPS 308 36 inches. Trench
OPS 322 __provided
3. Bedding/Backfill SAT OPS 308 Sand used
SF 418
4. Pipe Installation(Tracer Wire) SAT OPS 308 14-gauge
OPS 322
5. Valve Installation N/A OPS 703
6. Coating Condition N/A OPS 401
OPS 403
7. Manuals—Field Procedures, O & M SAT
8. Testing—Pressure, Duration, Type N/A OPS 505 Did not witness full test
9. OQ Qualifications SAT OPS 800 Verified
10. Casing Seal/Installation N/A OPS 325
11. Service Line Installation N/A OPS 302
12. Tie-In/Hot Tapping N/A OPS 600
13. Meter Location/Regulator Testing SAT OPS 302
14. Equipment Calibration Verification SAT OPS 501 Verified
15. EFV Installation N/A OPS 301
16. MAOP N/A OPS 602
OPS 606
OPS 900
OPS 1000
17. Pur`,c SAT OPS 603 Cleaning purge
18. Safety Equipment SAT SF 418 Fire extinguisher
SF 422
19. Abandonment N/A OPS 607
20. Line Locating SAT 7 OPS 611 Observed ELM
IPUC Form 4 Rev. 12//2v2023

IPUC Construction Inspection
21. Plastic Pipe SAT OPS 307 Manual Butt Fusion
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 324
- Heat Plate OPS 325
- Joining Procedure OPS 800
-Squeeze Off
22. Steel Pipe N/A OPS 200
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
-Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
4800
Additional Comments:
Address: Inspirado#2 (near Chinden and Star Road intersection)
Observations Included: Line locating(observed ELM refresh the markings), correct trench depth provided,
safety equipment, verification OQ records, verification of equipment calibrations, tracer wire installed,
bedding observed with sand, manual butt fusion, cleaning purge with compressed air,pressure test started
at 96 psi (did not observe completed test), squeeze off,bedding and backfill.
Corrective Action Required: Yes No X
Follow-up Required: By Date: Yes No X
inspector (Lead):
Date: 10/28/2024
Galli
Reviewer:
Brooks Date: �0_�-�1.�
I
P U C Form 4 Rev. 12/21/2023