Intermountain Gas 231108 Meridian Construction

IPUC Construction Inspection
Inspector(s): Galli Date(s): 11/8/2023
Company/Owner: Unit/OPID: 08160
Intermountain Gas Company (IGC
Address: 4703 W Fern Vista Court City/District: Meridian
Contractor/Job #: Foreman: Employees: See job list
413-47144 Librado Ruiz
Job Description: 1/4" Service Line Circle: Distribution
Operator Supervisor: Mingo One-Call Ticket: 413320
On-Site: Y
Total Inspection Days: .5
Tasks: Rating Critical Procedure# Comments
1. Materials—Handling, Storage, SAT OPS 11
Labeling
2. Trenching/Boring—Depth, Clearance SAT OPS 308
OPS 322
3. Bedding/Backfill SAT OPS 308
SF 418
4. Pipe Installation (Tracer Wire) SAT OPS 308
OPS 322
5. Valve Installation N/A OPS 703
6. Coating Condition N/A OPS 401
OPS 403
7. Manuals—Field Procedures, O & M SAT
8. Testing—Pressure, Duration, Type SAT OPS 505 Tested at 92 for 15 min
9. OQ Qualifications SAT OPS 800
10. Casing Seal/Installation N/A OPS 325
11. Service Line Installation SAT OPS 302
12. Tie-In/Hot Tapping N/A OPS 600
13. Meter Location/Regulator Testing N/A OPS 302
14. Equipment Calibration Verification SAT OPS 501 Pyrometer: 8/7/24
Pressure Gauge: 10/9/24
15. EFV Installation SAT OPS 301 EFV 1200
16. MAOP N/A OPS 602
OPS 606
OPS 900
OPS 1000
17. Pure N/A OPS 603
18. Safety Equipment SAT SF 418
SF 422
19. Abandonment N/A OPS 607
20. Line Locating N/A OPS 611
1PUC Form 4 Rev. April 2023

IPUC Construction Inspection
21. Plastic Pipe N/A OPS 307
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 324
- Heat Plate OPS 325
- Joining Procedure OPS 800
22. Steel Pipe N/A OPS 200
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
4800
Additional Comments:
IPUC inspector Galli observed Das-Co, a contractor for IGC install a 1/4' service line in Meridian, ID.
Address: 4703 W Fern Vista Ct, Meridian, ID
Observations Include: proper trench depth, safety equipment, tracer wire, verification of equipment
calibrations, EFV 1200 installation, successful pressure tests, mechanical stab fittings, squeeze off,
bedding with sand and backfill. Quizzed employees on AOCs of squeeze off procedures. All
procedures were followed in accordance with IGC Operations and Maintenance Manual.
Corrective Action Required: Yes No X
Follow-up Required: By Date: Yes No X
Inspector (Lead):
"��� �' Date: 11/08/2023
Galli -
Reviewer:
Date:
Brooks
IPUC Form 4 Rev. April 2023