Intermountain Gas 231101 Eagle Construction

IPUC Construction Inspection
Inspector(s): Galli, Brooks Date(s): 11/1/2023
Company/Owner: Unit/OPID: 08160
Intermountain Gas Company IGC
Address: 8489 & 8481 W Meltwater Lane City/District: Eagle
Contractor/Job #: Foreman: Employees: See job list
417-016194 & Rigo Chavarin
417-016570
Job Description: 1/4" Service Line Circle: Distribution
Operator Supervisor: Mingo One-Call Ticket: 430119 & 430121
On-Site: N
Total Inspection Days: 1
Tasks: Rating Critical Procedure# Comments
1. Materials—Handling, Storage, SAT OPS 11
Labeling
2. Trenching/Boring—Depth, Clearance SAT OPS 308
OPS 322
3. Bedding/Backfill SAT OPS 308
SF 418
4. Pipe Installation (Tracer Wire) SAT OPS 308
OPS 322
5. Valve Installation N/A OPS 703
6. Coating Condition N/A OPS 401
OPS 403
7. Manuals—Field Procedures, O & M SAT
8. Testing—Pressure, Duration, Type N/A OPS 505
9. OQ Qualifications SAT OPS 800
10. Casing Seal/Installation N/A OPS 325
11. Service Line Installation SAT OPS 302
12. Tie-In/Hot Tapping N/A OPS 600
13. Meter Location/Regulator Testing SAT OPS 302
14. Equipment Calibration Verification SAT OPS 501 Pyrometer: 6/5/24
Pressure Gauge: 1/6/24
15. EFV Installation N/A OPS 301
16. MAOP N/A OPS 602
OPS 606
OPS 900
OPS 1000
17. Pure N/A OPS 603
18. Safety Equipment SAT SF 418
SF 422
19. Abandonment N/A OPS 607
20. Line Locating SAT OPS 611
1PUC Form 4 Rev. April 2023

IPUC Construction Inspection
21. Plastic Pipe SAT OPS 307
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 324
- Heat Plate OPS 325
- Joining Procedure OPS 800
22. Steel Pipe N/A OPS 200
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
- Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
4800
Additional Comments:
IPUC inspectors Galli and Brooks observed Das-co, a contractor for IGC install two 3/4" service lines
from one service stub and single EFV.
Address: 8489 & 8481 W Meltwater Lane, Eagle, ID
Observation Include: trenching, line locating, safety equipment, proper meter placement, tracer wire,
butt fusion, squeeze off and bedding with sand. All observed procedures were followed in accordance
with IGC Operations and Maintenance Manual.
Corrective Action Required: Yes No X
Follow-up Required: By Date: Yes No X
Inspector (Lead): Date: 11/1/2023
Galli <��.. C:.. �
Reviewer: Date:
Brooks
IPUC Form 4 Rev. April 2023