Intermountain Gas 231030 Nampa Construction

IPUC Construction Inspection
Inspector(s): Galli Date(s): 10/30/2023
Company/Owner: Unit/OPID: 08160
Intermountain Gas Company (IGC)
Address: 41210t'Ave N (Trailer 6 & 8) City/District: Nampa
Contractor/Job #: Foreman: Employees: See job list
371-051981 Ethan Call
Job Description: Install % Service Line Circle: Distribution
Operator Supervisor: John One-Call Ticket: 410490
On-Site: Y
Total Inspection Days: 1
Tasks: Rating Critical Procedure# Comments
1. Materials—Handling, Storage, SAT OPS 11
Labeling
2. Trenching/Boring—Depth, Clearance SAT OPS 308
OPS 322
3. Bedding/Backfill SAT OPS 308
SF 418
4. Pipe Installation(Tracer Wire) SAT OPS 308
OPS 322
5. Valve Installation N/A OPS 703
6. Coating Condition N/A OPS 401
OPS 403
7. Manuals—Field Procedures, O & M SAT
8. Testing—Pressure, Duration, Type SAT OPS 505 96 psi for 15 minutes
9. OQ Qualifications SAT OPS 800
10. Casing Seal/Installation N/A OPS 325
11. Service Line Installation SAT OPS 302
12. Tie-In/Hot Tapping N/A OPS 600
13. Meter Location/Regulator Testing N/A OPS 302
14. Equipment Calibration Verification SAT OPS 501 Pyrometer: 7/6/24
Pressure Gauge: 4/11/24
15. EFV Installation N/A OPS 301 Existing EFV—Branch
16. MAOP N/A OPS 602
OPS 606
OPS 900
OPS 1000
17. Pure N/A OPS 603
18. Safety Equipment SAT SF 418
SF 422
19. Abandonment N/A OPS 607
20. Line Locating SAT OPS 611
1PUC Form 4 Rev. April 2023

I PUC Construction Inspection
21. Plastic Pipe SAT OPS 307
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 324
- Heat Plate OPS 325
- Joining Procedure OPS 800
22. Steel Pipe N/A OPS 200
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
- Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
4800
Additional Comments:
IPUC inspector Galli observed Das-Co, a contractor for Intermountain Gas Company install a 3/ service
line from an existing service.
Address: 412 1 Wh Ave N,Nampa, ID
Observation Include: line locating, trenching, safety equipment, tracer wire, butt fusion,pressure test at
96 psi for 15 minutes and bedding. Das-co employees were quizzed on applicable ADCs of fusion
procedures. All observed procedures were followed in accordance with IGC Operations and
Maintenance Manual.
Corrective Action Required: Yes No X
Follow-up Required: By Date: Yes No X
Inspector (Lead):
Galli _____.., Date: 10/30/2023
Reviewer:
Brooks Date: v -
IPUC Form 4 Rev. April 2023