Intermountain Gas 231025 Meridian Construction

IPUC Construction Inspection
Inspector(s): Brooks Date(s): 10/25/2023
Company/Owner: Unit/OPID: 08160
Intermountain Gas Company IGC
Address: 5161 N Brock Ave City/District: Meridian
Contractor/Job #: Foreman: Employees: On File
413-1874 Barrett Lobdell
Job Description: %" Service Line installation Circle: Distribution
Operator Supervisor: One-Call Ticket: 413318
On-Site: N
Total Inspection Days: 1
Tasks: Rating Critical Procedure # Comments
1. Materials—Handling, Storage, SAT OPS 11
Labeling
2. Trenching/Boring—Depth, Clearance SAT OPS 308
OPS 322
3. Bedding/Backfill SAT OPS 308
SF 418
4. Pipe Installation(Tracer Wire) SAT OPS 308
OPS 322
5. Valve Installation N/A OPS 703
6. Coating Condition N/A OPS 401
OPS 403
7. Manuals—Field Procedures, O &M SAT
8. Testing—Pressure, Duration, Type N/A OPS 505 Not Witnessed
9. OQ Qualifications SAT OPS 800
10. Casing Seal/Installation N/A OPS 325
11. Service Line Installation SAT OPS 302
12. Tie-In/Hot Tapping N/A OPS 600
13. Meter Location/Regulator Testing N/A OPS 302
14. Equipment Calibration Verification SAT OPS 501 Pyrometer: Due 9-8-24
Gauge: Due 8-7-24
15. EFV Installation SAT OPS 301 1200
16. MAOP N/A OPS 602
OPS 606
OPS 900
OPS 1000
17. Pure N/A OPS 603
18. Safety Equipment SAT SF 418
SF 422
19. Abandonment N/A OPS 607
20. Line Locating SAT OPS 611
IPUC Form 4 Rev. April 2023

IPUC Construction Inspection
21. Plastic Pipe SAT OPS 307
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 324
- Heat Plate OPS 325
- Joining Procedure OPS 800
22. Steel Pipe N/A OPS 200
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
- Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
4800
Additional Comments:
IPUC inspector Brooks observed Das-Co, a contractor for IGC install a 3/4" service at 5161 N Brock Ave
in Meridian, Idaho.
Observations included Safety equipment, trenching, bedding,backfilling, line-locating, fusing,
tracer-wire, 1200 EFV installion and meter placement. Quizzed employees on dig tickets and equipment
calibration.
All procedures were observed in compliance with IGCs Operations and Maintenance Manual.
Corrective Action Required: Yes No X
Follow-up Required: By Date: Yes No X
Inspector (Lead): Date: 10/25/23
Brooks
Reviewer:
Date:
IPUC Form 4 Rev. April 2023