Intermountain Gas 240417-18 Boise Construction

I PUC Construction Inspection
Inspector(s): Galli Date(s): 04/17-18/2024
Company/Owner: Unit/OPID: 08160
Intermountain Gas Company(IGC
Address: 2911 W Taft St City/District: Boise
Contractor/Job#: Foreman: Employees: See Job List
118175-425 German Gomez
1
Job Description: Install 3/4" Service Line(s) System Type: ® Distribution ❑ Transmission
Operator Supervisor: Jason One-Call Ticket: 2024151854
On-Site: Y
Total Inspection Days: 1.5
Tasks: Rating Critical Procedure# Comments
1. Materials—Handling, Storage, SAT OPS 11
Labeling
2. Trenching/Boring—Depth, Clearance SAT OPS 308 24 inches
OPS 322
3. Bedding/Backfill SAT OPS 308
SF 418
4. Pipe Installation (Tracer Wire) N/A OPS 308
OPS 322
5. Valve Installation N/A OPS 703
6. Coating Condition N/A OPS 401
OPS 403
7. Manuals—Field Procedures, O & M SAT
8. Testing—Pressure, Duration, Type N/A OPS 505
9. OQ Qualifications SAT OPS 800 Verified
10. Casing Seal/Installation N/A OPS 325
11. Service Line Installation SAT OPS 302
12. Tie-In/Hot Tapping N/A OPS 600
13. Meter Location/Regulator Testing SAT OPS 302
14. Equipment Calibration Verification SAT OPS 501 Temp gun 1/5/2025
15. EFV Installation N/A OPS 301�
16. MAOP N/A OPS 602
OPS 606
OPS 900
OPS 1000
17. Pure N/A OPS 603
18. Safety Equipment SAT SF 418 JSA & Fire Extinguisher
SF 422
19. Abandonment N/A OPS 607
20. Line Locating SAT OPS 611
IPUC Form 4 Rev. 12/21/2023

IPUC Construction Inspection
21. Plastic Pipe SAT OPS 307
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 324
- Heat Plate OPS 325
- Joining Procedure OPS 800
22. Steel Pipe N/A OPS 200
-Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
-Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
4800
Additional Comments:
IPUC inspector Galli observed Das-Co a contractor for IGC install 3/4" service line(s) in Boise, ID.
Address: 2911 W Taft St Boise, ID
Observations Include: Traffic control, asphalt cutting, correct trench depth, line locating, safety
equipment, verification of OQ records, verification of equipment calibrations, butt fusion and bedding.
All observed procedures were conducted in accordance with IGCs Operations and Maintenance Manual.
Corrective Action Required: Yes No X
Follow-up Required: By Date: Yes No X
Inspector(Lead): Date: 04/18/2024
Galli _--
Reviewer:
Date:
Brooks
IPUC Form 4 Rev. 12/21/2023