Intermountain Gas 240201 Twin Falls Construction

IPUC Construction Inspection
Inspector(s): Galli Date(s): 02/01/2024
Company/Owner: Unit/OPID: 08160
Intermountain Gas Company (IGC)
Address: 1956 Gage Ave City/District: Twin Falls
Contractor/Job#: Foreman: Employees: See Job List
21202-583 Lyle Hawkins
Job Description: Install %" Service Line System Type: ® Distribution ❑ Transmission
Operator Supervisor: Jake One-Call Ticket: 041877
On-Site: N
Total Inspection Days: 0.5
Tasks: Rating Critical Procedure# Comments
1. Materials—Handling, Storage, SAT OPS 11
Labeling
2. Trenching/Boring—Depth, Clearance SAT OPS 308
OPS 322
3. Bedding/Backfill SAT OPS 308 No sand needed
SF 418
4. Pipe Installation(Tracer Wire) :SAT OPS 308
OPS 322
5. Valve Installation N/A OPS 703
6. Coating Condition N/A OPS 401
OPS 403
7. Manuals—Field Procedures, O &M SAT
8. Testing—Pressure, Duration, Type SAT OPS 505 94 psi for 15 min
9. OQ Qualifications SAT OPS 800
10. Casing Seal/Installation N/A OPS 325
11. Service Line Installation SAT OPS 302
12. Tie-In/Hot Ta in N/A OPS 600
13. Meter Location/Regulator Testing SAT OPS 302
14. Equipment Calibration Verification SAT OPS 501 Pyrometer: NA
Pres. Gauge: 1/9/25
15. EFV Installation SAT OPS 301 EFV 1200
16. MAOP N/A OPS 602
OPS 606
OPS 900
OPS 1000
17. Pure N/A OPS 603
18. Safety Equipment SAT SF 418
SF 422
19. Abandonment N/A OPS 607
20. Line Locating SAT OPS 611
1PUC Form 4 Rev. 12/21/2023

IPUC Construction Inspection
21. Plastic Pipe SAT OPS 307
- Joiner(s) Qualified OPS 309
- Fusion Tools OPS 324
- Heat Plate OPS 325
- Joining Procedure OPS 800
22. Steel Pipe N/A OPS 200
- Welder(s) Qualified OPS 201
Pipe/Coating—Inspected/Repaired OPS 202
- Cathodic Protection OPS 306
-Non-Destructive Testing OPS 401
-Welding Procedures OPS 407
- Removal of asbestos wrap OPS 402
- Exothermic Welding OPS 403
4800
Additional Comments:
IPUC inspector Galli observed KV, a contractor,for IGC install a 3/' service line in Twin Falls, ID.
Address: 1956 Gage Ave, Twin Falls, ID
Observations Include: correct trench depth, line locating, safety equipment, verification of OQ records,
verification of equipment calibrations, tracer wire, EFV 1200 installation, stab fittings (couplers and
T's), bedding(sand not needed) and backfill. Quizzed employee on applicable AOCs of squeeze off
and bedding procedures. Contractor failed to conduct a continuity test of the tracer wire per OPS 307
Section 6.11 with a locating device. IGC FOC Jake Hunter and KV Manager Jason Gordon were
notified and issue was remediated.
Corrective Action Required: Yes 1 No X
Follow-up Required: By Date: Yes No X
Inspector(Lead): Date: 02/01/2024
Galli
Reviewer:
Brooks Date: • as -
IPUC Form 4 Rev. 12/21/2023