HomeMy WebLinkAbout20030207Amendment.pdfSTOEL
~~,
C1CC'f"',\Ll~L. ',L,
!LED 101 S. Capitol Boulevard. Suite 1900
Boise, Idaho 83702
main 208.389.9000
fax 208.389.9040
inl
;:-
R - -!'1 3: '.. -~V ~.
ATTORNEYS AT lAW
'n "?", n' "'
UTIUliES Cu iSS!OH
www.stoel.com
February 5 , 2003
MARYS. HOBSON
Direct (208) 387-4277
mshobson(fj)stoe1.com
VIA HAND DELIVERY
Jean Jewell, Secretary
Idaho Public Utilities Commission
472 West Washington Street
Boise, ID 83720-0074
Re:Case No. SPR-Ol-
Application for Approval of Amendment
Dear Ms. Jewell:
Enclosed for filing with this Commission on behalf of Qwest Corporation and Sprint
Communications Company, LP. is the original Application of for Approval of Amendment. The
parties respectfully request that this matter be placed on the Commission Decision Meeting Agenda
for expedited approval.
Please contact me if you have any questions concerning the enclosed. Thank you for your assistance
in this matter.
Very truly yours
:blg
Enclosure
Oregon
Washington
California
U I a h
Boise-152776.10029164-00016 Idaho
Mary S. Hobson (ISB# 2142)
Stoel Rives LLP
101 South Capitol Boulevard - Suite 1900
Boise, ill 83702
Telephone: (208) 389-9000
Facsimile: (208) 389-9040
~ ~ .
r-
)i,tCt: it:.
~t\
~T~ Cj:"R - 1 Pri 3: 4 \LU"", r ~,.
Ie'.
.,.- ' .
r'i,
UTiLI I ie;:" ISSION
-;"::--
Ken Ross, Director
Local Market Development
Sprint Communications LP
6450 Sprint Parkway (MS KSOPHN0212)
Overland Park, KS 66251
Telephone: (913) 534-6157
BEFORE THE IDAHO PUBLIC UTILITIES COMMISSION
JOINT APPLICATION OF QWEST
CORPORATION AND SPRINT
(::OlV(MUNlCATIONS COMPANY, L.P. :fOR
: .
APPROV AL OF THE AMENDMENT TO THE
. INTERCONNECTION AGREEMENT FOR,
THE STATE OF IDAHO PURSUANT TO'
US.C. ~ 252(e)
CASE NO. SPR-01-
Qwest Corporation ("Qwest") and Sprint Communications Company, LP. ("Sprint"
hereby jointly file this Application for Approval of the Amendment to the Interconnection
Agreement for the State of Idaho (the "Amendment"). A copy of the Amendment is submitted
herewith.
This Amendment was reached through voluntary negotiations without resort to mediation
or arbitration and is submitted for approval pursuant to Section 252(e) of the Communications
Act of 1934, as amended by the Telecommunications Act of 1996 (the "Act"
Section 252(e)(2) of the Act directs that a state Commission may reject an amendment
reached through voluntary negotiations only if the Commission finds that: the amendment (or
portiones) thereof) discriminates against a telecommunications carrier not a party to this
amendment; or the implementation of such an amendment (or portion) is not consistent with the
public interest, convenience and necessity.
APPLICATION FOR APPROVAL OF AMENDMENT - Page 1
Boise-152775.10029164-00016
Sprint and Qwest respectfully submit that this Amendment, which adds terms and
conditions for unbundled network elements combinations, provides no basis for either of these
findings, and, therefore jointly request that the Commission approve this Amendment
expeditiously. This Amendment is consistent with the public interest as identified in the pro-
competitive policies of the State of Idaho, the Commission, the United States Congress, and the
Federal Communications Commission. Expeditious approval of this Amendment will enable
Sprint to interconnect with Qwest facilities and to provide customers with increased choices
among local telecommunications services.
Sprint and Qwest further request that the Commission approve this Amendment without a
hearing. Because this Amendment was reached through voluntary negotiations, it does not raise
issues requiring a hearing and does not concern other parties not a party to the negotiations.
Expeditious approval would further the public interest.
Respectfully submitted this ay of February, 2003.
Qwest Corporation
~~:
Stoel Rives LLP, Attorneys for Qwest
and
Ken Ross
Sprint Communications Company, LP.
APPLICATION FOR APPROVAL OF AMENDMENT - Page 2
Boise-l 52775.1 0029164-00016
CLEC-To-CLEC Connections, CLEC-To-CLEC Cross Connections and Early Access
Amendment
to the Interconnection Agreement between
Qwest Corporation and
Sprint Communications Company, loP.
for the State of Idaho
This is an Amendment ("Amendment") to the Interconnection Agreement between Qwest
Corporation ("Qwest") , formerly known as US WEST Communications, Inc., a Colorado
corporation , and Sprint Communications Company, L.P. ("CLEC"
).
CLEC and Qwest shall be
known jointly as the "Parties
RECITALS
WHEREAS , CLEC and Qwest entered into an Interconnection Agreement ("Agreement") for
service in the state of Idaho which was approved by the Idaho Public Utilities Commission
Commission ); and
WHEREAS, the Parties wish to amend the Agreement further under the terms and conditions
contained herein.
AGREEMENT
NOW THEREFORE , in consideration of the mutual terms, covenants and conditions contained
in this Amendment and other good and valuable consideration , the receipt and sufficiency
which is hereby acknowledged , the Parties agree as follows:
Amendment Terms
The Agreement is hereby amended by adding terms, conditions and rates for CLEC-To-CLEC
Connections , CLEC-To-CLEC Cross Connections and Early Access as set forth in Attachment
and Exhibit A, to this Amendment, attached hereto and incorporated herein by this reference.
Effective Date
This Amendment shall be deemed effective upon approval by the Commission; however, the
Parties may agree to implement the provisions of this Amendment upon execution. To
accommodate this need, CLEC must generate if necessary, an updated Customer
Questionnaire. In addition to the Questionnaire, all system updates will need to be completed
by Qwest. CLEC will be notified when all system changes have been made. Actual order
processing may begin once these requirements have been met.
Further Amendments
Except as modified herein , the provisions of the Agreement shall remain in full force and effect.
The provisions of this Amendment, including the provisions of this sentence , may not be
amended , modified or supplemented, and waivers or consents to departures from the provisions
of this Amendment may not be given without the written consent thereto by both Parties
authorized representative. No waiver by any party of any default, misrepresentation, or breachSprint - 10
Amendment to COS-O10905-0050
of warranty or covenant hereunder, whether intentional or not, will be deemed to extend to any
prior or subsequent default, misrepresentation , or breach of warranty or covenant hereunder or
affect in any way any rights arising by virtue of any prior or subsequent such occurrence.
Entire Aareement
This Amendment (including the documents referred to herein) constitutes the full and entire
understanding and agreement between the Parties with regard to the subjects of this
Amendment and supersedes any prior understandings, agreements, or representations by or
between the Parties, written or oral, to the extent they relate in any way to the subjects of this
Amendment.
The Parties intending to be legally bound have executed this Amendment as of the dates set
forth below, in multiple counterparts, each of which is deemed an original , but all of which shall
constitute one and the same instrument.
Sprint Communications Company, loP.
~~ ~~~~~
(!.--J
-----
W. Richard Morris
Name PrintedlTyped
P. - State,cEk1:ernal Affairs
L. T. Christensen
Name PrintedlTyped
Dprpmhpr 10 , ?OO?
Date Date
Title
Sprint - ID
Amendment to CDS-010905-0050
ATTACHMENT 1
ATTACHMENT 1
CLEC-to-CLEC Connections
For the purposes of this section, CLEC-to-CLEC is defined as a collocating telecommunications carrier as
defined by the FCC in the Telecommunications Act of 1996.
Description
1 CLEC-to-CLEC Connections allow CLEC to connect with each other within a Qwest Premises for
the purpose of mutually exchanging traffic,
2 CLEC-to-CLEC Connections may be used to connect Collocation spaces of two different parties
within the same Qwest premises and may also be used to connect multiple forms of a CLEC'
Collocations within the same Qwest premises (e., Physical to Physical, Physical to Virtual, Virtual to
Virtual, or non-contiguous cageless bays).
There are two forms of CLEC-to-CLEC Connections:
Direct CLEC-to-CLEC Connection is a path engineered by Qwest between two Collocation spaces
however the CLEC(s) will be responsible for placing and connecting the cable.
CLEC-to-CLEC Cross-Connect is a cross connection, between two Collocation spaces, made on an
Interconnection Distribution Frame (ICDF) utilizing the terminations of the two Collocation spaces,
The CLEC-to-CLEC Cross-Connect is typically engineered and connected by Qwest. However, since
the two Collocations spaces must reside on the same ICDF the CLEC may install the cross-connects.
Terms and Conditions for CLEC-to-CLEC Direct Connections
Qwest shall design and engineer the most efficient route and cable racking for the connection
between the CLEC's equipment in its collocated spaces to the collocated equipment of another
CLEC located in the same Qwest Premises, or to the CLEC's own non-contiguous Collocation
space.
The most efficient route generally will be over existing cable racking, to the extent technically
feasible. But to determine the most efficient route and cable racking, Qwest shall consider all
information provided by the CLEC in the Application form, including, but not limited to, distance
limitations of the facilities the CLEC intends to use for the connection. If the length of the most
efficient route exceeds any such distance limitations, Qwest will notify the CLEC of available
options. As referenced in the ANSI Standard T1.102-1993 "Digital Hierarchy
" -
Electrical
Interface; Annex B, the maximum cabling distance limitations for DS1 and DS3 circuits (without
regeneration devices), using the ideal cable facilities, are as follows:
TYPE OF CONNECTION DISTANCE LIMIT
DS1 850 feet (standard 50/100 pair)
DS3 475 feet (using 734A/R59 cable)
DS3 220 feet (using 735A type cable)
When the CLEC notifies Qwest of its preferred option , Qwest will proceed with the route design
and Quote preparation, The Quote will include Channel Regeneration Charges, if applicable,
Sprint - 10
Amendment to COS-010905-0050
2.4
3.4
ATTACHMENT 1
, based on ANSI standards for cable distance limitations, regeneration is not required but is
requested by CLEC, the quote will include the applicable charges. If, based on ANSI standards
for cable distance limitations, regeneration is required, the quote will not include any charge for
regeneration, If CLEC elects to have Qwest provide the channel regeneration, the quote will
include the applicable charges
The CLEC shall have access to the designated route to construct such connection, using copper
coax, optical fiber facilities or any other technically feasible method, utilizing a vendor of the
CLEC's own choosing.
If the cable terminates in one or more Virtual Collocation spaces, the CLEC originating the
request must specify on the Application form if Qwest or an approved vendor will be responsible
for terminating the cable in the Virtual Collocation space,
To order this product, one of the two Collocation sites must already be completed with a final
Alternate Point of termination (APOT) provided,
If CLEC selects an approved vendor, CLEC must submit a Vendor LOA form with the CLEC
Application form.
This product is for Collocation element to Collocation element combination only, and not for
individual Unbundled Network Element (UNE) combinations.
Ordering CLEC-to-CLEC Direct Connections
CLEC-to-CLEC Connections shall be ordered as part of an initial Application for Collocation or
may be ordered as an augment to an existing collocation.
CLEC-to-CLEC Connections are limited to transmission cable only, and no power cable may
be run over the Qwest engineered route.
The CLEC is responsible for obtaining and submitting to its Sales Executive a Letter
Agreement (LOA) from each of the connecting collocating telecommunication carriers. A sample
LOA may be found on the Qwest wholesale website.
The Application may be submitted electronically; the signed LOA must also be submitted via
regular mail. This letter will state the intentions of both parties to use the Direct Connect to
interconnect its network with that of another collocating telecommunications carrier at the ILEC'
premises and to connect its collocated equipment to the collocated equipment of another
telecommunications carrier within the same premises, provided that the collocated equipment is
also used for interconnection with the ILEC or for access to the ILEC's UNEs. Fourth Report and
Order; Rule ~51.323(h). A Letter of Agreement is not required when one Collocator is connecting
its multiple Collocations together within the same Qwest Premises.
The CLEC is responsible for the following:
Completing and submitting the Collocation Application.
Ordering and arranging the delivery of the equipment cable.
Contracting with a vendor, or using its own appropriately trained installers, to have
all cabling installed on racking as designated by Qwest.
Ordering and supplying cable terminations (cable pair count) for all Virtual
Collocations.
Understanding and complying with the Qwest Premises required MOP and technical
publications
Installation of all termination blocks and any other associated equipment within
each Physical Collocation space.
Sprint - 10
Amendment to COS-010905-0050
ATTACHMENT 1
Installation and maintenance of any regeneration equipment required in its
Collocation site,
Tagging both ends of the connection.
If the CLEC is submitting a request for CLEC-to-CLEC Direct Connection to be performed with
the construction of the Collocation space, the CLEC must indicate this on the original Application.
Subsequent requests for CLEC-to-CLEC Direct Connections require CLEC to submit an augment
order to Qwest to verify the route for connections between the two Collocations. A request by
CLEC for a Direct CLEC-to-CLEC Connection in conjunction with the construction of the
Collocation space must be indicated on the original Collocation Application form.
Application -- Upon receipt of the applicable portions of a complete Collocation Application Qwest
will perform a feasibility study to determine if adequate cable racking can be found for the
placement of CLEC's copper, coax, or fiber optic cable, or any other Technically Feasible method
used to interconnect CLEC's collocated equipment that is in separate locations in the same
Qwest Premises, or to another CLEC's equipment in the same Premises. The feasibility study
will be provided within ten (10) calendar Days from date of receipt of a complete Application. If
Qwest determines that the Application is not complete, Qwest shall notify CLEC of any
deficiencies within ten (10) calendar Days of the Application, Qwest shall provide sufficient detail
so that CLEC has a reasonable opportunity to cure each deficiency. To retain its place in the
Collocation queue for the requested Premises, CLEC must cure any deficiencies in its Application
and resubmit the Application within ten (10) calendar Days after being advised of the deficiencies.
The CLEC must indicate the type of connection required:
Two party
One party with multiple forms of Collocation
Non-contiguous bay connectivity
The size and type of cable used with the connection must also be indicated
i.e., DSO, DS1 , DS3 or fiber.
Quotation -- If existing cable racking is available, Qwest will provide the CLEC with a Quote and
the specific cable rack route to the CLEC with the feasibility study. If additional cable racking is
required to accommodate the CLEC's request, Qwest shall provide a Quote for the cable racking
and the feasibility study to the within the ten (10) calendar days after receipt of the Collocation
Application, Quotes will be honored for thirty (30) calendar days from the date the Quote is
provided, During this period, the space is reserved pending the CLEC's Acceptance of the
quoted charges,
10 Acceptance -- There are two forms of Acceptance for CLEC-to-CLEC Direct Connections
CLEC-to-CLEC Direct Connections with existing cable rack. - The CLEC must submit payment
100 percent of the quoted nonrecurring charges with its Acceptance. Upon receipt of a complete
Collocation Acceptance , the CLEC may begin placement of its copper, coax or fiber cables along
the Qwest designated cable rack route. Recurring charges will begin with the CLEC'
Acceptance.
CLEC-to-CLEC Direct Connections using new cable rack. - Upon receipt of a complete
Acceptance from the CLEC (signed acceptance of the Quote and payment of the fifty percent
quoted charges), Qwest will begin construction of the new cable rack.
11 Interval - The construction interval for CLEC-to-CLEC Direct Connections shall be dependent
upon whether the Direct Connection is to the COSMICTM frame requiring a MELDTM and or if new
Sprint - 10
Amendment to COS-010905-0050
1.4.
ATTACHMENT 1
cable racking is required, Intervals for CLEC-to-CLEC Direct Connections can be found in the
Service Interval Guide located on Owest's Wholesale Web site.
If CLEC provides a complete Acceptance within thirty (30) calendar Days of receipt of the Owest
Collocation quotation, Owest shall complete its installation of the Direct Connection above the
DSO level where no new cable racking is required within thirty (30) calendar Days of the receipt
the complete Collocation Acceptance. If Direct Connection is required at the DSO level , to the
CaSMICTM , or if new cable racking needs to be installed, Owest will provision the direct trunking
within sixty (60) calendar Days of the receipt of the complete Collocation Acceptance,
Rate Elements for CLEC-to-CLEC Direct Connections
Nonrecurring CLEC-to-CLEC Connection Charges recovers the cost of order processing, design
and engineering, Additional charges will be assessed for Virtual Collocation connections and
cable holes, if applicable.
1.4.1.1 CLEC-to-CLEC Connection Charge - Includes order processing, feasibility study, quoting,
engineering labor to engineer cable route and provided cable racking. This is a flat rate charge.
1.4,2 Additional labor charge for terminating cable in Virtual Collocation equipment (if
applicable),
1.4.3 Cable hole charge if core drilling is necessary.
1.4.1.4 Regeneration, if applicable,
1.4.2 There are recurring charges for cable racking,
1.4.1 Cable racking for leasing the space on the racking.
1.4.2,2 Regeneration , if applicable.
CLEC-to-CLEC Cross Connections
Description
1. A CLEC-to-CLEC Cross-Connection (CaCC-X) is defined as the CLEC's capability to order a
cross-connection from its Collocation in a Owest Premises to its non-adjacent Collocation space
or to another CLEC's Collocation within the same Owest Premises at the ICDF This is
accomplished by the use of the CLEC's Connecting Facility Assignment (CFA) terminations
residing at the same ICDF and at the same service rate level. The tie cables to the common
ICDF frame would be ordered through the existing Collocation Application form.
2.2.
Terms and Conditions for CLEC-to-CLEC Cross Connection:
Owest will provide the capability to combine these separate Collocations through an
Interconnection Distribution Frame (ICDF). This is accomplished by the use of CLECs
Connecting Facility Assignment (CFA) terminations residing at an ICDF. Also, ICDF Cross
Connections must terminate on the same ICDF at the same service rate level.
If CLEC has its own Dedicated ICDF, CLEC is responsible for ordering tie cables to the common
ICDF frame/bay where the other CLEC resides. These tie cables would be ordered through the
Sprint - 10
Amendment to COS-O10905-0050
2.4
3.4
ATTACHMENT 1
existing Collocation Application form.
If two (2) CLECs are involved, one CLEC acts as the "ordering" CLEC. The ordering CLEC
identifies both connection CFA's on the ASR. CLEC requests service order activity by using the
standard ASR forms. These forms are agreed upon nationally at the OBF (Ordering and BillingForum), Refer to the DMP (Document Management Platform)/Carrier/Carrier
Centers/"A"/"ASOG" for copies of all forms including definitions of the fields. CLEC is responsible
for obtaining these forms. Owest will not reproduce copies for its Customers. The standard
industry forms for CLEC-to-CLEC Cross Connections (COCC-X) are: Access Service Request
(ASR), Special Access (SPE) and Additional Circuit Information (ACI),
This product is for Collocation element to Collocation element combination only, and not for
individual Unbundled Network Element (UNE) combinations.
The CLEC is responsible for the end-to-end service design for the service connection,
Depending on the distance parameters of the combination, regeneration may be required.
, based on ANSI standards for cable distance limitations, regeneration is not required but is
requested by CLEC, the quote will include the applicable charges. If, based on ANSI standards
for cable distance limitations, regeneration is required, the quote will not include any charge for
regeneration. If CLEC elects to have Owest provide the channel regeneration, the quote will
include the applicable charges
Ordering CLEC-to-CLEC Cross Connections
The tie cables to the common ICDF frame must be ordered through the existing Collocation
Application form and must be pre-provisioned prior to CLEC's submission of an Access Service
Request (ASR).
CLEC-to-CLEC Cross-Connections are ordered separately from a Collocation Application
utilizing the ASR process (CLEC-to-CLEC Cross Connections at ICDF).
CLEC is responsible for the end-to-end service design that uses ICDF cross-connection to ensure
that the resulting service meets its Customer s needs. This is accomplished by CLEC using the
Design Layout Record (DLR) for the service connection, Depending on the distance parameters
of the combination , regeneration may be required,
If two (2) CLECs are involved, one CLEC acts as the "ordering" CLEC. The ordering CLEC
identifies both connection CFA's on the ASR. CLEC requests service order activity by using
the standard ASR forms, These forms are agreed upon nationally at the OBF (Ordering and
Billing Forum). Refer to the DMP (Document Management Platform)/Carrier/Carrier
Centers/"A"/"ASOG" for copies of all forms including definitions of the fields. CLEC is
responsible for obtaining these forms, Owest will not produce ASR forms for CLEC. The
standard industry forms for CLEC-to-CLEC Cross Connections (COCC-X) are: Access
Service Request (ASR), and Additional Circuit Information (ACI).
Application -- Upon receipt of the applicable portions of a complete Collocation Application
(Subsections a, e, hand j), Owest will perform a feasibility study to determine if adequate cable
racking can be found for the placement of CLEC's copper, coax, or fiber optic cable, or any other
Technically Feasible method used to interconnect CLEC's collocated equipment that is in
separate locations in the same Owest Premises, or to another CLEC's equipment in the same
Premises. The feasibility study will be provided within ten (10) calendar Days from date of receipt
Sprint - 10
Amendment to COS-010905-0050
ATTACHMENT 1
of a complete Application. If Qwest determines that the Application is not complete, Qwest shall
notify CLEC of any deficiencies within ten (10) calendar Days of the Application. Qwest shall
provide sufficient detail so that CLEC has a reasonable opportunity to cure each deficiency,
retain its place in the Collocation queue for the requested Premises, CLEC must cure any
deficiencies in its Application and resubmit the Application within ten (10) calendar Days after
being advised of the deficiencies,
Quotation -- If existing cable racking is available, Qwest will provide the CLEC with a Quote and
the specific cable rack route to the with the feasibility study, If additional cable racking is required
to accommodate the CLEC's request, Qwest shall provide a Quote for the cable racking and the
feasibility study to the CLEC within the ten (10) calendar days after receipt of the Collocation
Application, Quotes will be honored for thirty (30) calendar days from the date the Quote is
provided. During this period , the space is reserved pending the Acceptance of the quoted
charges.
There are two forms of Acceptance for CLEC-to-CLEC Cross Connections,
Cross Connections with existing cable rack, - The CLEC must submit payment of 100
percent of the quoted nonrecurring charges with its Acceptance. Upon receipt of a
complete Collocation Acceptance, the CLEC may begin placement of its copper, coax or
fiber cables along the Qwest designated cable rack route. Recurring charges will begin
with the CLEC's Acceptance.
Cross Connections using new cable rack. - Upon receipt of a complete Acceptance from
the CLEC (signed acceptance of the Quote and payment of the 50 percent of quoted
charges), Qwest will begin construction of the new cable rack.
Interval - The construction interval for Cross Connections shall be dependent upon whether the
Cross Connection is to the COSMICTM frame requiring a MELDTM and or if new cable racking is
required. Intervals for Cross Connections can be found in the Service Interval Guide located on
Qwest's Wholesale Web site,
If CLEC provides a complete Acceptance within thirty (30) calendar Days of receipt of the Qwest
Collocation quotation, Qwest shall complete its installation of the Direct Connection above the
DSO level where no new cable racking is required within thirty (30) calendar Days of the receipt of
the complete Collocation Acceptance, If Direct Connection is required at the DSO level , to the
COSMICTM , or if new cable racking needs to be installed , Qwest will provision the direct trunking
within sixty (60) calendar Days of the receipt of the complete Collocation Acceptance.
Rate Elements for CLEC-to-CLEC Cross Connections
There is a nonrecurring charge for Qwest performing the CLEC-to-CLEC Cross Connection.
Regeneration , monthly and nonrecurring, if applicable.
Early Access
Description
Early Access to Collocation allows CLEC the option to install CLEC's equipment when
Collocation space is physically conditioned, but prior to Qwest's completion of other supporting
infrastructure work. The Early Access option enables CLEC to access the market more quickly,
Sprint - 10
Amendment to COS-010905-0050
2.4
3.4.
ATTACHMENT 1
Terms and Conditions
Early Access is offered with either Caged Physical or Cage less Physical Collocation,
Early Access must be coordinated by CLEC , the Qwest Wholesale Collocation Project Manager
and the State Interconnection Manager (SICM) by Central Office (CO) building location.
Before Early Access is allowed, the workspace must be conditioned for the physical placement
CLEC collocated equipment, and work in the space must meet all applicable state and federal
safety laws and regulations, For Caged Physical Collocation space, the enclosure must be
complete before Early Access will be granted,
If some interference should occur with CLEC equipment installation due to potential common
systems work, Qwest will work with CLEC as needed to coordinate the efforts of both parties.
The work could include, but is not limited to, the placement of power cables and associated
racking, any necessary heating, air conditioning (HVAC) and/or miscellaneous types
infrastructure work.
CLEC may request Early Access to Collocation space prior to the Ready for Service (RFS) date
provided on CLEC initial Collocation Quote.
In order to obtain Early Access, in addition to the initial 50% payment, CLEC must pay 80%
percent of the remaining 50% percent of the quoted nonrecurring charges before Early Access is
granted, leaving a holdback of 10% percent of the originally quoted nonrecurring charges.
Ordering
To request Early Access, CLEC must contact the Qwest Wholesale Collocation Project Manager
at colo~qwest.com , and provide CLEC requested location(s),
The Early Access date, will be negotiated between CLEC and Qwest. The Qwest Wholesale
Project manager will email the firm date for the early access to CLEC prior to CLEC submitting its
early access payment.
The final Alternate Point of Termination (APOT) will be provided when the entire construction
activity has been completed and the remaining final nonrecurring charges have been paid,
Billing
Billing will start on the Early Access Date, This includes all appropriate (e., space and cable
racking) recurring charges.
Sprint - 10
Amendment to COS-01 0905-0050
Exhibit A
Idaho
CLEC to CLEC
Design Engineering & Installation - No Cables
Cable Racking, Per Foot
DSO
DS1
DS3
$0.14410
$0.15475
$0.13009
6.4 Cable Hole (if Applicable)$463.
Virtual Connections (if applicable - Connections only No cables)
DSO (Per 100 Connections)
DS1 (Per 28 Connections)
DS3 (Per 1 Connection)
$200.
$93.
$6.
CLEC to CLEC Cross Connection $266.
NOTES:
Unless otherwise indicated, all rates are pursuant to the Owest and AT&T Interconnection Agreement approved by the Idaho Public Utilnies
Commission in Docket Number USW-96-15, Commission Order Number 27738, effective September 17, 199B.
(1)Rates proposed in Cost Docket testimony filed on 6/29/01 & 11/16/2001. (TELRIC)
Owest Idaho SGA T Third Revision Exhibit A Third Amended October 16, 2002 Page 1 of 1