20020524Exhibit F Effective 05-24-02.pdf

EXHIBIT F - SPECIAL REQUEST PROCESS
Qwest Idaho SGAT Third Revision, Exhibit F May 24, 2002 Page 1
1. The Special Request Process shall be used for the following requests:

1.1 Requesting specific product feature(s) be made available by Qwest that are
currently available in a switch, but which are not activated.
1.2 Requesting specific product feature(s) be made available by Qwest that are not
currently available in a switch, but which are available from the switch vendor
1.3 Requesting a combination of Unbundled Network Elements that is a combination
not currently offered by Qwest as a standard product and:
1.3.1 that is made up of UNEs that are defined by the FCC or the Commission
as a network element to which Qwest is obligated to provide unbundled access,
and;
1.3.2 that is made up of UNEs that are ordinarily combined in the Qwest
network.
1.4 Requesting an Unbundled Network Element that has been defined by the FCC or
the State Commission as a network element to which Qwest is obligated to provide
unbundled access, but for which Qwest has not created a standard product, including,
but not limited to, OC-192 (and such higher bandwidths that may exist) UDIT, EEL
between OC-3 and OC-192 and new varieties of subloops.
2. Any request that requires an analysis of Technical Feasibility shall be treated as a Bona
Fide Request (BFR), and will follow the BFR Process set forth in this Agreement. If it is
determined that a request should have been submitted through the BFR process, Qwest will
consider the BFR time frame to have started upon receipt of the original Special Request
application form.
3. A Special Request shall be submitted in writing and on the appropriate Qwest form,
which is located on Qwest’s website.
4. Qwest shall acknowledge receipt of the Special Request within two (2) business days of
receipt.
5. Qwest shall respond with an analysis, including costs and timeframes, within fifteen (15)
business days of receipt of the Special Request. In the case of UNE Combinations, the analysis
shall include whether the requested combination is a combination of network elements that are
ordinarily combined in the Qwest network. If the request is for a combination of network
elements that are not ordinarily combined in the Qwest network, the analysis shall indicate to
CLEC that it should use the BFR process if CLEC elects to pursue its request.
6. Upon request, Qwest shall provide CLEC with Qwest’s supporting cost data and/or
studies for Unbundled Network Elements that CLEC wishes to order within seven (7) business
days, except where Qwest cannot obtain a release from its vendors within seven (7) business
days, in which case Qwest will make the data available as soon as Qwest receives the vendor
release. Such cost data shall be treated as Confidential Information, if requested by Qwest
under the non-disclosure sections of this Agreement.