HomeMy WebLinkAbout20040728Amendment.pdf!LED
r71
io...-i
""'
' 1';\t=-Ltl\ t
Mary S. Hobson (ISB# 2142)
Stoel Rives LLP
101 South Capitol Boulevard - Suite 1900
Boise, ill 83702
Telephone: (208) 389-9000
Facsimile: (208) 389-9040
mshobson~stoel.com
znoii JUL 28 PM 3: 3~
!i(: FLciLiC
UTILl fiLS CDr"lf~'lISSION
Peter H. Reynolds
MCImetro Access Transmission Services LLC
22001 Loudon County Parkway - Suite G2-614
Ashburn, VA 20147
Telephone: (703) 886-1918
Facsimile: (703) 886-0118
BEFORE THE IDAHO PUBLIC UTILITIES COMMISSION
JOINT APPLICATION OF QWEST
CORPORATION AND MCIMETRO
ACCESS TRANSMISSION SERVICES LLC
FOR APPROVAL OF A WIRE LINE
INTERCONNECTION AGREEMENT
PURSUANT TO 47 U.C. ~252(E)
CASE NO.: QWE-O2-
APPLICATION FOR APPROVAL OF
AMENDMENT TO THE
INTERCONNECTION AGREEMENT
Qwest Corporation ("Qwest") and MCImetro Access Transmission Services LLC
MCImetro ) hereby jointly file this Application for Approval of Amendment to the
Interconnection Agreement ("Amendment"), which was approved by the Idaho Public Utilities
Commission on November 21 , 2002 (the "Agreement"). A copy of the Amendment is submitted
herewith.
This Amendment was reached through voluntary negotiations without resort to mediation
or arbitration and is submitted for approval pursuant to Section 252( e) of the Communications
Act of 1934, as amended by the Telecommunications Act of 1996 (the "Act"
Section 252(e)(2) of the Act directs that a state Commission may reject an amendment
reached through voluntary negotiations only if the Commission finds that: the amendment (or
portiones) thereof) discriminates against a telecommunications carrier not a party to this
agreement; or the implementation of such an amendment (or portion) is not consistent with the
public interest, convenience and necessity.
APPLICATION FOR APPROVAL OF AMENDMENT TO THE INTERCONNECTION AGREEMENT Page 1
Boise-174149.1 0029164-00016
MCImetro and Qwest respectfully submit this Amendment provides no basis for either of
these findings, and, therefore jointly request that the Commission approve this Amendment
expeditiously. This Amendment is consistent with the public interest as identified in the pro-
competitive policies of the State of Idaho, the Commission, the United States Congress, and the
Federal Communications Commission. Expeditious approval of this Amendment will enable
MCImetro to interconnect with Qwest facilities and to provide customers with increased choices
among local telecommunications services.
MCImetro and Qwest further request that the Commission approve this Amendment
without a hearing. Because this Amendment was reached through voluntary negotiations, it does
not raise issues requiring a hearing and does not concern other parties not a party to the
negotiations. Expeditious approval would further the public interest.
Respectfully submitted this 28th day of July, 2004.
and
Peter H. Reynolds
MCImetro Access Transmission Services, LLC
APPLICATION FOR APPROVAL OF AMENDMENT TO THE INTERCONNECTION AGREEMENT Page 2
Boise-174149.10029164-00016
CERTIFICATE OF SERVICE
I hereby certify that on this 28th day of July, 2004, I served the foregoing
APPLICATION FOR APPROVAL OF AMENDMENT TO THE INTERCONNECTION
AGREEMENT upon all parties of record in this matter as follows:
Jean Jewell, Secretary
Idaho Public Utilities Commission
472 West Washington Street
O. Box 83720
Boise, Idaho 83720-0074
11 ewell~puc.state.id. us
Hand Delivery
U. S. Mail
Overnight Delivery
Facsimile
Email
Peter H. Reynolds
MCImetro Access Transmission Services LLC
22001 Loudon County Parkway - Suite G2-614
Ashburn, VA 20147
Telephone: (703) 886-1918
Facsimile: (703) 886-0118
Hand Delivery
U. S. Mail
Overnight Delivery
Facsimile
Email
Brandi L. Gearhart, PLS
Legal Secretary to Mary S. Hobson
Stoel Rives LLP
APPLICATION FOR APPROV AL OF AMENDMENT TO THE INTERCONNECTION AGREEMENT Page 3
Boise-174149.1 0029164-00016
AMENDMENT TO INTERCONNECTION AGREEMENT FOR ELIMINATION OF UNE-P AND
IMPLEMENTATION OF BATCH HOT CUT PROCESS AND DISCOUNTS
between
Qwest Corporation and MClmetro Access Transmissi9n Services, LLC
for the State of Idaho
This Agreement is entered into by and between Qwest Corporation ("Qwest"
) ,
a Colorado
corporation , and MClmetro Access Transmission Services LLC ("MCI") effective as of the
Effective Date, defined below. Qwest and MCI shall be known jointly as the "Parties
RECITALS
WHEREAS , MCI adopted Qwest's statement of generally available terms as its interconnection
agreement (the "ICA") for services in the state of Idaho; and
WHEREAS , the Parties may during the Term of this Amendment enter into new interconnection
agreement(s) and/or amend existing interconnection agreement(s);
WHEREAS, MCI previously purchased on an unbundled basis from Qwest certain combinations
of network elements, ancillary functions, and additional features , including without limitation the
local loop, port , switching, and shared transport combination commonly known as unbundled
network element platform ("UNE-
WHEREAS such UNE-P arrangements were previously obtained by MCI under the terms and
conditions of certain interconnection agreements including without limitation in certain states
Qwest's statement of generally available terms;
WHEREAS both MCI and Qwest acknowledge certain regulatory uncertainty in light of the DC
Circuit Court's decision in United States Telecom Association v. FCC, 359 F.3d 554 (March 2
2004), with respect to the future existence, scope , and nature of Qwest's obligation to provide
such UNE-P arrangements under the Communications Act (the "Act"
WHEREAS to address such uncertainty and to create a stable arrangement for the continued
availability to MCI from Qwest of services technically and functionally equivalent to the June 14
2004 UNE-P arrangements the parties have contemporaneously entered into a Master Service
Agreement for the provision of Qwest Platform PlusTM service (the "QPPTM MSA"); and
WHEREAS , the Parties have agreed to the following terms and conditions which during the
Term of this Amendment are intended to supplement in part and supercede in part the terms
and conditions of their existing interconnection agreement and any new interconnection
agreements they may enter into.
AGREEMENT
NOW THEREFORE , in consideration of the mutual terms , covenants and conditions contained
in this Amendment and other good and valuable consideration, the receipt and sufficiency of
which is hereby acknowledged , the Parties agree as follows:
Section 1.0 - Definitions
Batch Hot Cut" refers to a hot cut performed pursuant to the Batch Hot Cut Process described
in Attachment A.
UNE-P Elimination/Batch Hot Cut Amd MCI/ID
Amendment to CDS-O21 0O9-0006/dhd
Individual Hot Cut" refers to a hot cut that is not performed pursuant to a batch process.
Section 2.0 - General Terms and Conditions
Effective Date. This Amendment shall become effective on July 16, 2004 ("Effective
Date
Term.The term of this Amendment shall begin on the Effective Date and shall remain in
effect through July 31 , 2008. At any time within 6 months prior to expiration of the Amendment
either Party may provide notice of renegotiation. Upon mutual agreement, the term of the
Amendment may be extended upon the same terms and conditions for no more than one (1) six
month extension period. If the QPP MSA is terminated (for reasons other than material breach
by MCI) with respect to a particular state, this Amendment shall , by its own terms and
notwithstanding any requirement that subsequent modifications or amendments be in writing
signed by both Parties, automatically be terminated in that state , and MCI shall be free
thereafter to pursue any available means to purchase UNE-P or equivalent services from
Qwest.
Scope of Amendment.The provisions of this Amendment are intended to amend and
supercede those provisions of MCI's existing and all future interconnection or other agreements
only as they relate to the offering of unbundled mass market switching or unbundled enterprise
switching and unbundled shared transport in combination with other network elements as part of
the unbundled network element platform, and Batch Hot Cuts, as defined below (collectively, the
Services ). The Services and related terms and conditions described in this Agreement are
applicable only in Qwest's incumbent LEC service territory in the states of Arizona, Colorado
Idaho , Iowa , Minnesota, Montana, Nebraska New Mexico, North Dakota , Oregon , South
Dakota, Utah, Washington and Wyoming.
2.4 Existinq Rules The provisions in this Amendment are intended to be in compliance with
and based on the existing state of the law, rules , regulations and interpretations thereof
including but not limited to Federal rules, regulations , and laws , as of June 17, 2004 (the
Existing Rules ). Nothing in this Agreement shall be deemed an admission by Qwest or MCI
concerning the interpretation or effect of the Existing Rules or an admission by Qwest or MCI
that the Existing Rules should not be changed, vacated , dismissed , stayed or modified. Nothing
in this Amendment shall preclude or estop Qwest or MCI from taking any position in any forum
concerning the proper interpretation or effect of the Existing Rules or concerning whether the
Existing Rules should be changed, vacated , dismissed, stayed or modified.
Chanqe of Law.If a change in law, rule, or regulation materially impairs a party s ability
to perform or obtain a benefit under this Amendment, both parties agree to negotiate in good
faith such changes as may be necessary to address such material impairment.
Requlatorv Approval.In the event the FCC , a state commission or any other
governmental authority or agency rejects or modifies any material provision in this Amendment
either party may immediately upon written notice to the other Party terminate this Amendment
and the QPP MSA.
Entire Aqreement.This Amendment (including all Exhibits) constitutes the full and entire
understanding and agreement between the Parties with regard to the subjects of this
Amendment and supersedes any prior understandings, agreements, or representations by or
between the Parties , written or oral, including but not limited to , any term sheet or memorandum
UNE-P Elimination/Batch Hot Cut Amd MCI/ID
Amendment to CDS-O21009-0006/dhd
of understanding entered into by the Parties, to the extent they relate in any way to the subjects
of this Amendment.
Section 3.0 - Batch Hot Cut Terms and Conditions
Individual Hot Cuts. All hot cuts, except for those hot cuts performed pursuant to a batch
process, will be provided by Qwest to MCI at the rates, terms and conditions set forth in MCI'
interconnection agreement.
Batch Hot Cut Process Upon deployment of the Batch Hot Cut Status Tool and
amendment of Appointment Scheduler to accommodate Batch Hot Cut orders , Qwest shall
provide Batch Hot Cuts to MCI upon the rates, terms and conditions set forth in this Agreement.
The Parties agree to follow the Batch Hot Cut Process described in Attachment A. MCI agrees
to use commercially reasonable efforts to use the Batch Hot Cut Process under this Agreement
even in states in which the Individual Hot Cut rate is lower than the Batch Hot Cut Rate.
Batch Hot Cut Rates:The base Batch Hot Cut price is $27.50 per line unless the
incentive thresholds below are met. If the number of MCI's QPPTM lines as of October 31 , 2005
equals or exceeds 90% of the sum of MCI's QPPTM and UNE-P lines as of October, 31 , 2004
the Batch Hot Cut rate for MCI will be reduced to $23 per line for Batch Hot Cuts performed
during the time period from January 1 , 2006 through December 31 , 2006. If the number of
MCI's QPPTM lines as of October 31 , 2006 equals or exceeds 90010 of the sum of MCI's QPPTM
and UNE-P lines as of October, 31 , 2005 , the Batch Hot Cut rate for MCI will be reduced to
$18.50 per line for Batch Hot Cuts performed during the time period from January 1 , 2007
through end of the term of this Amendment. For purposes of this section, the number of QPPTM
lines and the sum of QPPTM and UNE-P lines shall be calculated on a regionwide basis that
includes all states in which this Amendment is in effect.
3.4 Batch Hot Cut Rate Adjustment:If after the Effective Date, for a state in which the
Individual Hot Cut rate is higher than the Batch Hot Cut Rates under this Amendment (inclusive
of the discounts set forth in Section 3.3) as of the Effective Date, the rate for Individual Hot Cuts
in such state is subsequently lowered below the Batch Hot Cut Rates contained in this
Amendment (inclusive of the discounts set forth in Section 3.3), then the Batch Hot Cut rates
under this Amendment (including the discounted rates set forth in Section 3.3) that are higher
than the newly-lowered state rate for Individual Hot Cuts will be automatically adjusted
downward prospectively (with such new rates being implemented for MCI region-wide for all
fourteen states) by an amount equal to the difference in the newly-lowered state Individual Hot
Cut rate and each higher Batch Hot Cut Rate under this Amendment multiplied by the
percentage of Qwest local service lines in that state compared to the total number of Qwest in-
region local service lines.
Example 1: The individual hot cut rate in Arizona is lowered from the current TELRIC
rate to $30.00 per line. Because $30.00 is higher than the Batch Hot Cut Rates under
this Amendment, there would be no adjustment.
Example 2: The individual hot cut rate in Montana is lowered on January 1 , 2006 from
the current TELRIC rate to $20.00 per line. The $27.50 and $23.00 Batch Hot Cut Rates
(but not the $18.50 rate) shall be reduced effective January 1 , 2006 as follows.
New lowered Batch Hot Cut Rate = $27.50 - (($27.50 - $20.00) x (Number of
Qwest local service lines in Montana / Total number of Qwest local service lines
in Qwest's fourteen state territory))
UNE-P Elimination/Batch Hot Cut Amd MCI/ID
Amendment to CDS-O21 0O9-0006/dhd
New lowered Batch Hot Cut Rate = $23.00 - (($23.00 - $20.00) x (Number of
Qwest local service lines in Montana / Total number of Qwest local service lines
in Qwest's fourteen state territory))
Batch Hot Cut Tools Qwest is in the process of developing a Batch Hot Cut Scheduling
Tool and a Batch Hot Cut Status Tool. MCI understands that these Tools will not be available
until IMA 16.0 is released and MCI will not be able to submit requests for Batch Hot Cuts until
IMA 16.0 is released. Qwest shall use best reasonable commercial efforts to release IMA 16.
by December 31 , 2004. The Batch Hot Cut Scheduling Tool will be enhanced in a future IMA
release if and to the extent the enhancement is supported by the CLEC community. If
approved, the enhancement will include the ability to reserve due dates for IDLC in cumulative
batches of no more than 40 IDLC loops per state per day. Qwest and MCI agree to support as
a high priority the enhancement for IDLC inclusion in the Batch Hot Cut Scheduling Tool and will
work this through the systems prioritizations procedures in the Qwest Wholesale Change
Management Process. Qwest and MCI will rank this enhancement change request within the
top twenty-five percent (25010) of all change requests to be prioritized through the Qwest
Wholesale Change Management Process when this change request is prioritized. The Parties
agree to the following service assurance approach for these Tools:
Batch Hot Cut Schedulinq Tool Availability. To the extent that there is a systems
failure that exceeds 48 hours and creates an inability to request a Batch Hot Cut, Qwest
will work in good faith with MCI to develop a negotiated settlement with respect to the
cost difference between the Qwest QPPTM monthly recurring charge (MRC) and the
Unbundled Loop MRC times the number of days that MCI was unable to order a Batch
Hot Cut. Settlement discussions would be initiated upon the written request of MCI.
Batch Hot Cut Status Tool System Refresh Timeliness . After the deployment of
the Batch Hot Cut Status Tool , Qwest and MCI will work cooperatively to review the
system logic and processes in an effort to determine an appropriate measurement
approach. The parties agree to take the least-cost approach to capture this performance
experience.
6 The Batch Hot Cut pricing provisions in this Amendment are subject to the following
conditions:
A. Integrated Digital Loop Carrier ("IDLC") is not a part of the standard Batch Hot Cut
process. However, the pricing for Batch Hot Cuts will apply to IDLC loops. IDLC loops will be
batched together in quantities of no more than 40 IDLC loops per state, per day.
B. Line Splitting to Loop Splitting conversions can be included the Batch Hot Cut
process at the same pricing for Batch Hot Cuts stated above. For purposes of this Section , a
line splitting to loop splitting conversion means a conversion from Qwest as the switch provider
to a CLEC switch provider where the data or DLEC provider and the loop remain the same.
C. Batch Hot Cut limits are in effect as established in the Batch Hot Cut Process
described in Attachment A.
Section 4.0 - Removal of UNE-, Enterprise and Mass Market Switching and Shared
Transport from Interconnection Agreement(s)
Aqreement Not to Order. During the term of this Agreement Qwest shall not offer or
provide to MCI , and MCI shall not order or purchase from Qwest unbundled mass market
switching, unbundled enterprise switching or unbundled shared transport, in combination with
other network elements as part of the unbundled network element platform ("UNE-), out of its
UNE-P Elimination/Batch Hot Cut Amd MCI/ID
Amendment to CDS-O21009-0006/dhd
existing interconnection agreement(s) with Qwest, a Qwest SGA T or any other interconnection
agreement governed by 47 U.C. ~~251 and 252 that MCI or one of its affiliates may in the
future enter into with Qwest and MCI waives any right under applicable law in connection
therewith. Notwithstanding the foregoing, nothing in this Section shall prevent Qwest from
offering or providing QPPTMservices to MCI or MCI from ordering or purchasing QPPTMservices
from Qwest. The agreement not to order UN E-P services embodied in this Section shall remain
in effect for the Term of this Amendment, and for the avoidance of doubt, shall no longer be
binding on MCI or otherwise enforceable in a particular state if the QPP MSA is terminated as to
that state (other than for reason of material breach by MCI).
Section 5.Other Terms and Conditions of Interconnection Agreements
Other Interconnection Terms. This Amendment is not intended to alter, adjust or extend
existing interconnection arrangements between Qwest and MCI except as expressly set forth
herein and all such other interconnection arrangements and related terms and conditions shall
remain in full force and effect.
MCI may use Qwest's Directory Assistance Services or operator services and may
arrange to provide access to its own , or to a third party , directory assistance or operator
services platform. Qwest Branded Operator Services and Directory Assistance may be
purchased by MCI pursuant to the terms of the applicable ICA, SGA T, or tariff. MCI Branded
Operator Services and Directory Assistance will also be available from Qwest using Originating
Line Number Screening ("OLNS"). Qwest will provide MCI nondiscriminatory access to Qwest'
directory assistance listings.
Line splitting will be available for loops provided pursuant to the ICA , such that MCI may
provide DSL service using the high-frequency portion of such a loop and a MCI-provided
splitter, or MCI may contract with a third-party CLEC to provide such DSL service to an MCI End
User Customer over the high frequency portion of the loop. The loop pre-qualification, ordering,
provisioning, repair, maintenance and other support functions and services to support MCls use
of line splitting in connection with loops shall be provided as set forth in the ICA.
The Parties intending to be legally bound have executed this Amendment as of the dates set
forth below, in multiple counterparts, each of which is deemed an original, but all of which shall
constitute one and the same instrument.
MClmetro Access TransmissionS ices, LLC
Qwest Corporation
Signatu
flA l Ut11f;L 0\ut1-Name PrintedlTyped
\/~U ~~.(~1~
TRia
fJifI O,/
Date
Signature
L. T. Christensen
Name PrintedlTyped
Director - Interconnection Aareements
Title
Date
UNE-P Elimination/Batch Hot Cut Amd MCIIID
Amendment to CDS-O21009-0006/dhd
existing interconnection agreement(s) with Qwest, a Qwest SGAT or any other interconnection
agreement governed by 47 U.C. 99251 and 252 that MCI or one of its affiliates may in the
future enter into with Qwest and MCI waives any right under applicable law in connection
therewith. Notwithstanding the foregoing, nothing in this Section shall prevent Qwest from
offering or providing QPPTMservices to MCI or MCI from ordering or purchasing QPPTMservices
from Qwest. The agreement not to order UNE-P services embodied in this Section shall remain
in effect for the Term of this Amendment, and for the avoidance of doubt, shall no longer be
binding on MCI or otherwise enforceable in a particular state if the QPP MSA is terminated as to
that state (other than for reason of material breach by MCI).
Section 5.Other Terms and Conditions of Interconnection Agreements
Other Interconnection Terms. This Amendment is not intended to alter, adjust or extend
existing interconnection arrangements between Qwest and MCI except as expressly set forth
herein and all such other interconnection arrangements and related terms and conditions shall
remain in full force and effect.
MCI may use Qwest's Directory Assistance Services or operator services and may
arrange to provide access to its own , or to a third party s, directory assistance or operator
services platform. Qwest Branded Operator Services and Directory Assistance may be
purchased by MCI pursuant to the terms of the applicable ICA, SGA T, or tariff. MCI Branded
Operator Services and Directory Assistance will also be available from Qwest using Originating
Line Number Screening ("OLNS"). Qwest will provide MCI nondiscriminatory access to Qwest's
directory assistance listings.
Line splitting will be available for loops provided pursuant to the ICA, such that MCI may
provide DSL service using the high-frequency portion of such a loop and a MCI-provided
splitter, or MCI may contract with a third-party CLEC to provide such DSL service to an MCI End
User Customer over the high frequency portion of the loop. The loop pre-qualification, ordering,
provisioning, repair, maintenance and other support functions and services to support MCls use
of line splitting in connection with loops shall be provided as set forth in the ICA.
The Parties intending to be legally bound have executed this Amendment as of the dates set
forth below, in multiple counterparts, each of which is deemed an original , but all of which shall
constitute one and the same instrument.
MClmetro Access Transmission
Services, LLC
Qwest Corporation
c..-
Signature Signature
Name Printedrryped
L. T. Christensen
Name Printedrryped
Date
Director - Interconnection AQreements
Title
C/lf€1 iDate
Title
UNE-P Elimination/Batch Hot Cut Amd MCI/ID
Amendment to CDS-O21009-0006/dhd
Attachment A
Attachment A: Batch Hot Cut Process
The Batch Hot Cut (BHC) installation option permits MCI to migrate existing defined analog
services to a two or four (2/4) wire analog Unbundled Loop in those instances where existing
facilities currently serving the end-user customer can be reused without requiring a field
technician dispatch. Except as defined below, existing analog services provisioned over
Integrated Digital Loop Carrier (IDLC) or originating out of a Remote Switching Unit (RSU) and
terminating on an exchange (EX) cable are not eligible for the BHC because the dispatch of a
field technician would be required. In addition, the coordination provisioning options for
unbundled loops are not available when using the BHC process.
A. The BHC process is available to migrate to unbundled loops from the following
services whether they be in Qwest retail Qwest resale Qwest UNE-, or Qwest
Platform PlusTM (QPPTM ) formats: Residential POTS , Business POTS , Centrex 21
Centrex Plus/Centron, Analog DID , and public access lines.
1. The BHC process is also available to convert a line split loop as
defined in Section 9.21 of Qwest's SGA T using one of the
aforementioned types of UNE-P or QPPTM lines to a loop splitting
arrangement. This option will be made available upon the development
of systems upgrade to accommodate such a request. Qwest will use
best reasonable commercial efforts to deploy this capability by
December 31 , 2004 coincident with IMA release 16.
2. A modified BHC process can be used to transition loops currently
provisioned over IDLC. In that circumstance, the IDLC batch must be
made up exclusively of lines currently provisioned over IDLC, and
identified and designated as such by MCI using one of Qwest's loop
qualification tools. In those circumstances, the IDLC batch will consist
of no more than 40 loops per state per day. Qwest's scheduling tool
will be enhanced in a future IMA release if and to the extent the
enhancement is supported by the CLEC community. If approved , the
enhancement will include the ability to reserve due dates for IDLC in
cumulative batches of no more than 40 IDLC loops per state per day.
Qwest and MCI agree to support as a high priority the enhancement for
IDLC inclusion in the scheduling tool and will work this through the
systems prioritizations procedures in the Qwest Wholesale Change
Management Process. Qwest and MCI will rank this enhancement
change request within the top twenty-five percent (25%) of all change
requests to be prioritized through the Qwest Wholesale Change
Management Process when this change request is prioritized.
B. Except as set forth above for IDLC batches, the BHC must be for a minimum of
twenty-five (25) Unbundled Loops per CLEC per Central Office and a maximum of one
hundred (100) Unbundled Loops among all CLECs per Central Office per day. There is
also a fourteen state region-wide maximum for all CLECs of two thousand five hundred
500) loops per day for all of Qwest's Central Offices.
C. The BHC option is available during standard unbundled loop business days
which are defined in the Provisioning and Installation Procedural PCA T. The due date
for the BHC process is set by a standard seven (7) business day installation interval.
UNE-P Elimination/Batch Hot Cut Amd MCI/ID
Amendment to CDS-O21009-0006/dhd
Attachment A
Qwest will complete provisioning of the loops associated with a particular batch between
3:00 a.m. and 11 :00 a.m. local time on the due date.
D. Before MCI submits any orders for unbundled loops using the BHC process, MCI
and Qwest agree to schedule a meeting in order to create a MCI specific migration plan
if such plan is required. The migration plan shall include CO by CO prioritization
volumes by CO, overall timeframe of migration to be agreed upon between MCI and
Qwest. The jointly developed MCI migration plan will be assigned a priority based upon
its creation date in the event multiple CLECs contend for batch hot cuts in similar
geographies and exceed volume thresholds as defined in Section B above. Upon
mutual agreement, the priority assigned to all or part of the jointly developed MCI
migration plan may change. In this event, Qwest will coordinate with all parties to create
an overall migration plan that considers everyone s priorities and expectations.1. If MCI and Qwest are unable to reach a consensus on the migration plan
any affected party shall have the right to appeal the migration plan to the State
Commission , and to seek expedited relief.2. Once the migration plan is completed, the migration date for MCI'
requests included in the BHC is established by MCI through the use of the
appointment scheduling tool. All requests submitted in the appointment
scheduling tool will be processed on a first come, first served basis until the
Central Office maximum volume of one hundred (100) Unbundled Loop
migrations per day is reached or the two thousand five hundred (2 500) region-
wide per day maximum BHC volume is reached. However, if MCI is found to
have submitted orders that materially alter the agreed upon migration plan, and
such order submission precludes another CLEC from submitting orders set forth
in its migration plan, MCI's requests can be limited within the scheduling tool in
order to allow space for other CLEC orders.a. Requests beyond the Central Office or the region-wide maximum
volume will be scheduled for the next available Due Date.b. If MCI is unable to reach the minimum volume of twenty-five (25)
Unbundled Loop migrations required for a BHC per Central Office, MCI
may reschedule its BHC request to a Due Date when the minimum
volume can be met (subject to the migration plans of other CLECs). If
MCI is unable to meet the minimum volume requirement, MCI may select
an alternate Due Date utilizing any of the other six (6) installation options
for each individual request.3. MCI shall request BHC installation by designating a "B" on its LSR in the
CHC field.
The Provisioning interval for the BHC is seven (7) business days.a. MCI agrees to have dial tone present on its CFA by 12:00 a.
(midnight) local time on the first business day following order submittal.b. Qwest will complete pre-wire of the lines included in the batch
(other than IDLC batches) on either the second or third business day of
UNE-P Elimination/Batch Hot Cut Amd MCI/ID
Amendment to CDS-O21009-0006/dhd
Attachment A
the Provisioning interval unless Qwest finds no dial tone or if the dial tone
is defective (e., reversal or wired to the wrong MCI office equipment) on
the pre-wire date. During this time frame if a jeopardy exists, Qwest will
notify MCI of the jeopardy via the BHC Status Tool. During this time
frame if a jeopardy exists MCI will commit to correct the no dial tone
condition and have dial tone available to Qwest by 3:00 a.m. local time on
the order Due Date. If CFA changes are required MCI will submit a
supplement to the LSR by 12:00 p.m. (noon) local time on the fourth
business day of the standard interval. If MCI dial tone is not available or
is defective on the Due Date , Qwest will place MCI's order in jeopardy
status and require MCI to supplement the LSR to establish a new Due
Date using either a new batch or using a different installation option.1. If the jeopardy causes the number of lines in the batch to
drop below twenty (20) lines , Qwest reserves the right to reject the entire
batch and to place all lines associated with the BHC order into jeopardy
status.2. All related lines to the order placed into jeopardy (e.
related lines in a business or in a hunt group) shall also be placed into
jeopardy status.c. On both the pre-wire date (as noted above) as well as the lift and
lay date (the Due Date), Qwest will test for MCI dial tone and ANI the line
to ensure that MCI's dial tone is working properly. On the Due Date, if the
correct telephone number is working on MCI's facilities, Qwest will
monitor the line and perform the lift and lay. The lift and lay removes
MCI's End User Customer line from the Qwest End Office Switch and
migrates the End User Customer s line to MCI's Switch. Once MCI has
received notification via the BHC status tool , that a line has been
migrated, MCI will have two (2) hours to request that the Unbundled Loopbe restored back to its original state. The restoration shall begin
immediately upon request by MCI. No response from MCI indicates
acceptance of the order completion, and Qwest will proceed to disconnect
the original service. If MCI requests removal from the batch , MCI must
issue a new or supplemental LSR to reinitiate the provisioning process for
the line(s) in question.d. Qwest will provision the lines in the batch in the order that makes
the most economic sense for Qwest. MCI will not be able to dictate the
order in which the lines will be provisioned , except that multiple lines for a
single customer in a single location (including hunt groups) ordered on
the same LSR will be provisioned together.
E. The Batch Status Tool will provide MCI with the current status of its BHC
requests for any given central office on an individualline-by-line basis. The Batch Status
Tool will return a display that will list status changes on BHC orders occurring for that
day. The display will provide the affected telephone numbers, order numbers, related
order numbers, CFA, and PON number associated with the BHC requested.
Subsequent changes to the status of any order will be noted in the Batch Status Tool.
The Batch Status Tool will provide, on the day of the cut, the start time and the
UNE-P Elimination/Batch Hot Cut Amd MCI/ID
Amendment to CDS-O21009-0006/dhd
Attachment A
completion time on a line-by-line basis. ,If MCI is interested in capturing the exact
moment the conversion work is completed, MCI'current switch should have the
capability to capture ("trap ) the conversion and issue and request to have the
subscription submitted for number porting.
1. Currently, Qwest'BHC Status Tool and amendments to Appointment
Scheduler to account for the BHC process are scheduled for deployment
October 18 , 2004. Such tools will not be available before that date. The BHC
process will not be available as a provisioning option until these tools are
deployed.2. If there is a delay in deployment of these tools, MCI will be notified using
the existing Change Management processes.3. Once deployed , MCI must use the Batch Status Tool and Appointment
Scheduler to utilize the BHC process.4. The Batch Hot Cut process defined here will not be in effect until the
Batch Status Tool and Appointment Scheduler are developed, tested, and
deployed.5. The IDLC modified batch process will be excluded from the batch
scheduling tool until the time when systems modifications and enhancements , in
a future IMA release , are in place. However, IDLC conversions will be handled
on an exception basis using the manual methodsuntil the time when these
modifications and enhancements are in place.
UNE-P Elimination/Batch Hot Cut Amd MCI/ID
Amendment to CDS-O21009-0006/dhd